In
Andy said:
I can't find out why the power options aren't working.
So far I have
1. Applied a windows patch
2. I have the newest video drivers
I also read that a lot of people experienced the same
thing when they went to SP3. Any other areas to check ?
Andy
I've never heard of anything like that happening because of SP-3
but I do have a question:
Did you read and follow the instructions about what to do
before installing SP-3?
Are you sure you had the right SP3? The entire SP3 is
humongous so one usually downloads the one for his brand of OS
and computer.
If all that's OK, you might try uninstalling SP3 and see if
the problem gets fixed. I doubt very much it will.
What I would try is to run a chkdsk /r on your boot driive.
It'll ask you to Restart in order to run it; that's normal for
the boot drive. That might fix it.
Always, before you do anything that's OS intensive like
chkdsk, be sure to make a full backup first. XP does have its own
backup program so a third party app is not necessary. And if
you're not doing regular backups, you should get a process going
where you do it regularly for all drives. Then when a drive fails
you at least can get all the iinformation back.
Failing that, a good AV/A Malware attack is probably next, just
to be sure you don't have anything like malware on the machine.
Another thing to try is to do an XP "repair in place". You won't
lose any programs or data, but be sure you have a backup in place
first anyway.
I remember how to get there this way: Boot from the original
XP disk or recovery disk or whatever you have, and watch the
screen. One of the first screens will have an "R" choice - do NOT
use that one. Keep going and the SECOND time you see an "R"
choice, use that one. It will recopy all the necessary files onto
your drive, thus "repairing" any corrupted files.
Or, if no disk, use whatever recovery method was provided with
the computer. Doing a complete INstall of XP will mean all your
programs will need to be reinstalled, plus updates since SP3.
And you do know that SP1 or 2 must be installed before you can
install SP3, right?
Go to MS and get the instructions on what to do before
installiing SP3.
HTH,
Twayne`