Please help... How do I combine 2 enabled network adapters?

[Guest]

Hi all... Kind of a strange question, but I need help As soon as possible..

I have _2_ seperate networking devices enabled, one is a wired ethernet port
which has network 1 into it, and I also have a wireless card that is
connected to an entirely seperate modem/network within close range.. Right
now, the way I am telling windows which device to send/receive on is by
typing:

route add 192.168.1.0 mask 255.255.255.0 192.168.1.1
route change 0.0.0.0 mask 0.0.0.0 192.168.2.1 metric 1

In turn, this will force all my internet traffic through the 192.168.2.1
network instead of the 192.168.1.1 net, but while leaving the 192.168.1.1
network available internally...

The problem is, I want to utilize BOTH bandwidths simultaneously.. Someone
on IRC said it can defintely be done with some commands or settings in XP ,
and its called "Bridging" or something but then he had to leave and I am
stuck here.. I want to combine upload speeds from both when I am uploading..
Like my 192.168.2.x network gives me 240kb/s upload, but then theres a
completely un-utilized 90kb/s upload on my 192.168.1.x network that I want to
make use of!

Can someone please help me out, sorry for the confusing explaination..

THANKS ALOT in advance!

Cheers!!

PS: Sorry I posted this in the wrong forum before I think

 

[Jack \(MVP-Networking\).]

Hi
Not too much can be done with two connections.
Combining is Not an option with regular hardware and Client OS.
The best you can do is described here.
Combining two Internet Connections - http://www.ezlan.net/loadbalance.html
Jack (MVP-Networking).