PCI Standard PCI-to-PCI Bridge

P

Paul

In the systems manager under motherboard resources I have
two PCI Standard PCI-to-PCI Bridge's listed. One has a
yellow exclamation point on it and the other is by
connection set up for my network adapter. I am informed by
the Properties of it that there are not enough resources
for it.
My problem seems to be related to my video card. When I
disabled the PCI Standard PCI-to-PCI Bridge that is
connected to the Network Adapter, my Hercules Prophet
4000XT finally was recognised by Windows and worked
properly. With the thing reenable the card refused to work
and is not seen in device manager even though the
Motherboard bios sees it. What's going on here?

Paul
 
J

Jetro

Install chipset drivers and AGP driver; if you have Athlon, there should be
an AMD patch.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Conflicts/Sharing 3
PCI Bridge Two Bridges Too Far 4
PCI-PCI Bridge re-install on every cold boot 3
Twp PCI Video card 6
How to install "PCI to PCI Bridge" driver, associated with WinTV card installation? 3
agp to pci bridge problem 1
PCI to PCI Bridge not enough resources 2
ati2dvag BSOD - get new video card? 6

Top