P4C800-E dlx, Antec AMG1000 & LEDs

[Rich]

I find a connector for IDE HDD activity but find none for SATA HDD activity.
My case provides 4 LEDs to monitor activity. One goes to power, one to IDE
and two more. Am I missing them or are there no connectors for LEDs to the
SATA controller?

Thanks,
Rich

 

[DaveW]

There are NO SATA activity LED connections.

 

[Rich]

Bummer. I was hoping I'd just missed something. Now I'll have to figure
out what to do with these extra LEDs.

Thanks for the quick response.
R



--
Return address modified for spam protection. Remove windy to reply.

There are NO SATA activity LED connections.

 

[snoopy]

HD activity LEDS have been a standard forever. I wonder why they didn't at
least allow this to configurable in the BIOS? I've got a similar Antec case
that has 2 unused LEDS and would have liked to have hooked them up to
monitor SATA activity. Oh well...

Bummer. I was hoping I'd just missed something. Now I'll have to figure
out what to do with these extra LEDs.

Thanks for the quick response.
R

 

[Rich]

If you have a separate controller card, (my promise IDE card in my current
computer for example), it usually has an LED connection. This mobo while
having RAID, both SATA and PATA, does not apparently have a connection for a
HDD activity LED for either connection.