P2Bs - PL-iP3/T

[Will van Dongen]

I Have a Asus P2BS board rev. 1.03, Pentium II (400Mhz), FSB 100Mhz, bios
1014.beta003, 384Mb (PC100) installed with Windows 98 SE. I have the
intention to buy a powerleap LP-IP3/T with a Tuatalin CPU's (1400 MHz) In
the manual downloaded form there site I can't find anything for the jumper
settings of processor speed.

On the site of Asus I can't find any information regarding IP3/T in
combination with my motherboard. Also the jumper settings for the processor
speed stops with 800 Mhz?

My question is do you need to set the jumper setting for the processor
speed?



Will van Dongen
Netherlands

 

[Robert Hancock]

The CPU speed jumper setting has no effect with any Intel CPU newer than a
PII-350 or so, they are all multiplier locked and use the correct
FSB-to-clock-speed multiplier regardless of the multiplier that the system
tries to set. So, shouldn't be a problem.