L
luppie
I longed for those days when MS Word was easy to use whenever I need
to create an auto-update numeric index TOC.
Back then when the grass was green -- in Office 2000, I just apply the
heading 1, 2, 3 ... style to my headers and MS Word automatically
generates a and increments the numeric indices's for my headers and
put them in the TOC.
Now, using Office 2007, I figure I can do the same and apply heading
1, 2, 3 ... style to my headers but the MS God is not always too
kind. MS Word '07 won't generate or increment the numeric indices's
for my headers, nor would the SW put them (in order) in the TOC.
As you can see, heading 2 style does not automatically increment and
so on. MS put out a fine tutorial video on the internet but they
neglected to use numeric headers that engineers use in our documents.
Perhaps I just don't know how to setup and use this feature in MS
Office 2007. Please help me!
1. Introduction
1.1 Scope
1.2 References
2. System Overview
3. Interface
1.3 External Interface <--- this should increment to 3.1
1.1.1 Beacon <--- this should increment to 3.1.1
1.1.2 Ground Radio <--- this should increment to 3.1.2
1.1.1.1 Primary COMM Link ... and so on
1.1.3 Payload Sub-system
1.1.1.2 Payload Image Data File
1.1.1.3 Interface with the PC104 Sub-system
1.4 Internal Interface
1.1.4 Interface between the CPC and the PC104 Sub-systems
1.1.5 CPC Sub-system
1.1.1.4 Beacon
1.1.1.5 Primary COMM Link
1.1.1.6 Coarse-Point Control
1.1.1.7 Power Management (GPIO lines on the PIC)
1.1.6 PC104 Sub-system
1.1.1.8 Star Tracker Module
1.1.1.9 IMU Module
1.1.1.10 Reaction Wheels
APPENDIX 1
to create an auto-update numeric index TOC.
Back then when the grass was green -- in Office 2000, I just apply the
heading 1, 2, 3 ... style to my headers and MS Word automatically
generates a and increments the numeric indices's for my headers and
put them in the TOC.
Now, using Office 2007, I figure I can do the same and apply heading
1, 2, 3 ... style to my headers but the MS God is not always too
kind. MS Word '07 won't generate or increment the numeric indices's
for my headers, nor would the SW put them (in order) in the TOC.
As you can see, heading 2 style does not automatically increment and
so on. MS put out a fine tutorial video on the internet but they
neglected to use numeric headers that engineers use in our documents.
Perhaps I just don't know how to setup and use this feature in MS
Office 2007. Please help me!
1. Introduction
1.1 Scope
1.2 References
2. System Overview
3. Interface
1.3 External Interface <--- this should increment to 3.1
1.1.1 Beacon <--- this should increment to 3.1.1
1.1.2 Ground Radio <--- this should increment to 3.1.2
1.1.1.1 Primary COMM Link ... and so on
1.1.3 Payload Sub-system
1.1.1.2 Payload Image Data File
1.1.1.3 Interface with the PC104 Sub-system
1.4 Internal Interface
1.1.4 Interface between the CPC and the PC104 Sub-systems
1.1.5 CPC Sub-system
1.1.1.4 Beacon
1.1.1.5 Primary COMM Link
1.1.1.6 Coarse-Point Control
1.1.1.7 Power Management (GPIO lines on the PIC)
1.1.6 PC104 Sub-system
1.1.1.8 Star Tracker Module
1.1.1.9 IMU Module
1.1.1.10 Reaction Wheels
APPENDIX 1