NTLDR is missing

  • Thread starter Thread starter jianugget
  • Start date Start date
J

jianugget

I have the same "NTLDR is missing" problem.

I have recently installed a 2nd WD 400G HD, which has been running fine for
over 3 weeks.

But this arvo my PC cracked a fit and stalled, I had to restart and checked
in the BIOS and found it was not detecting the original 400G Disk which Vista
was on a partition off.

I switched everything off and checked the cables and found one was loose and
there it was back in the BIOS. However I then got the NTLDR is missing thing.
So I went for the Vista install CD and it had to re-detect windows (recover
it?). Still no good, so I tried system restore from the Vista Disk. Still no
good. Then I tried Command Prompt and tried the solution the last chap had
luck with and still no good..

Please help me, I seem to know too little to be of help to myself and enough
to be dangerous.

Cheers
 
Go into bios setup, and set as the boot disk drive (in hard disk boot
priority or hard disk drives) the original 400GB drive.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top