ntldr is missing

  • Thread starter Thread starter caryrjr
  • Start date Start date
C

caryrjr

I have been trying to resolve this issue for three days. I have read the
support document on Microsoft's site and it has not resolved the issue.

Please help!
 
Assuming you have not left a floppy disk in the floppy drive, I would try
disconnnecting the IDE cable of the HD at both ends, and reconnecting, or
installing another IDE cable. If this fails, your drive may be going bad.
Can you boot into safe mode? When did this start happening?

Willie
 
Hi,

Boot the WinXP CD, load the Recovery Console by hitting "r" when prompted.
From the command prompt, run "copy X:\I386\ntldr C:\" (assumes a default
install to C:\, use your actual CD drive letter instead of X). Exit the
Recovery Console, remove the CD and restart the system.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP

Associate Expert - WindowsXP Expert Zone

Windows help - www.rickrogers.org
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Outlook SAGE 50 Cloud Accounts & Outlook 365 not talking to each other anymore ....! 0
NTLDR IS MISSING 2
NTLDR is Missing 7
Ntldr error....help?? 8
NTLDR boot problem 3
NOT an ntldr is missing question, but a problem 3
NTLDR File is missing Msg upon Windows startup 13
Malwarebytes does not load on start up or manually from the short cut. 3

Back
Top