G
Guest
Greetings
Just updated to SP2 and all was going well. I have a home box, Intel
D845EBG2 mobo with a 1.7 Ghz chip, 1 G RAM, Nvidia display, HP 35470A SCSI
tape drive with an Adaptec SCSI card on board. Before SP2 I had no problems
running NTBACKUP and archiving to tape. Now, NTBACKUP wont start - it hangs
as an image in memory and every two minutes I get the following error:
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10010
Date: 11/13/2004
Time: 7:53:04 PM
User: xxxxxxxxxxx
Computer: xxxxxxxxx
Description:
The server {D61A27C6-8F53-11D0-BFA0-00A024151983} did not register with DCOM
within the required timeout.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
I get the same identical error if I try to start Removable Storage from the
mmc console. Any ideas?
Thanks!
Mark / Grand Forks ND
Just updated to SP2 and all was going well. I have a home box, Intel
D845EBG2 mobo with a 1.7 Ghz chip, 1 G RAM, Nvidia display, HP 35470A SCSI
tape drive with an Adaptec SCSI card on board. Before SP2 I had no problems
running NTBACKUP and archiving to tape. Now, NTBACKUP wont start - it hangs
as an image in memory and every two minutes I get the following error:
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10010
Date: 11/13/2004
Time: 7:53:04 PM
User: xxxxxxxxxxx
Computer: xxxxxxxxx
Description:
The server {D61A27C6-8F53-11D0-BFA0-00A024151983} did not register with DCOM
within the required timeout.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
I get the same identical error if I try to start Removable Storage from the
mmc console. Any ideas?
Thanks!
Mark / Grand Forks ND