T
Terry
Some background info...
I recently installed a new motherboard and additional new
hard drive (120GB). The CPU is a Celeron 2.5GHz, and the
RAM is 512MB. I installed W2K Pro onto the new drive.
Setup shows the new drive as 122GB (Master), and the old
drive as 30022MB (Slave). The drives were partioned as
follows:
2.32GB = C "OS"
14.6GB = D "PERSDOCS"
15.8GB = E "BACKUP"
46.5GB = F "PROGRAMS"
49.7GB = G "MUSICPHOTOS"
13.2GB = H "FLAN2" (This is the old drive with old info
saved to be transferred to appropriate locations as soon
as I was ready to do so. I don't think this drive was ever
partioned correctly since I don't appear to have access to
the drives full capacity, which is a separate issue.)
While I know, now, that I should have made my OS drive a
bit larger it was never my intention to store anything
other than the OS itself here, and install all programs to
one drive (F drive, PROGRAMS). ALL the drives, except the
OS drive (C), have mega free space available.
The Problem...
I did have my HP ScanJet up and running on this newly
built system, but all of a sudden it quit functioning, and
would not send prints to the printer. (Printer has been
tested separately in various other apps. and works just
fine.) So I re-installed the scanner software to the same
folder on the PROGRAMS drive. Still not functioning
properly. I uninstalled the scanner software and upon
attempting to re-install it as a new program, it continues
to come back with this "Severe" error message: "The
installation drive that you selected does not contain
enough free space. Please select another drive or create
more space on the desired drive." No matter which drive I
choose to install the scanner software to, it keeps coming
back with that same error message. What is wrong?
Thanks!
I recently installed a new motherboard and additional new
hard drive (120GB). The CPU is a Celeron 2.5GHz, and the
RAM is 512MB. I installed W2K Pro onto the new drive.
Setup shows the new drive as 122GB (Master), and the old
drive as 30022MB (Slave). The drives were partioned as
follows:
2.32GB = C "OS"
14.6GB = D "PERSDOCS"
15.8GB = E "BACKUP"
46.5GB = F "PROGRAMS"
49.7GB = G "MUSICPHOTOS"
13.2GB = H "FLAN2" (This is the old drive with old info
saved to be transferred to appropriate locations as soon
as I was ready to do so. I don't think this drive was ever
partioned correctly since I don't appear to have access to
the drives full capacity, which is a separate issue.)
While I know, now, that I should have made my OS drive a
bit larger it was never my intention to store anything
other than the OS itself here, and install all programs to
one drive (F drive, PROGRAMS). ALL the drives, except the
OS drive (C), have mega free space available.
The Problem...
I did have my HP ScanJet up and running on this newly
built system, but all of a sudden it quit functioning, and
would not send prints to the printer. (Printer has been
tested separately in various other apps. and works just
fine.) So I re-installed the scanner software to the same
folder on the PROGRAMS drive. Still not functioning
properly. I uninstalled the scanner software and upon
attempting to re-install it as a new program, it continues
to come back with this "Severe" error message: "The
installation drive that you selected does not contain
enough free space. Please select another drive or create
more space on the desired drive." No matter which drive I
choose to install the scanner software to, it keeps coming
back with that same error message. What is wrong?
Thanks!