No Storage\Volume

S

skagway095

Joined
Jun 22, 2005
Messages
19
Reaction score
0
Hi,

I created a devices.pmq using the TAP.EXE utility. When I import it into the Component Designer I find the following warning in the import log file:

Warning:Could not find a driver for Hardware Device: HID\Vid_0a81&Pid_0205&Rev_0010&MI_01&Col02 (HID\Vid_0a81&Pid_0205&Rev_0010&MI_01&Col02).
Warning:Could not find a driver for Hardware Device: STORAGE\Volume (STORAGE\Volume).
Warning:Could not find a driver for Hardware Device: STORAGE\Volume (STORAGE\Volume).

I'm using a 20GB HDD with 2 partitions (C: 4GB, D: 13GB) . What device drivers are needed. There are no drivers for "Storage volumes" in the Hardware/Devices/Storage Volumes section.
What do I do to resolve this problem?

skagway095
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Driver Installation Problems 0
Obscure error messages during PMQ import 3
Not able to create image, warning:1116 2
Storage volume error in TAP 1
Cryptic Import Message 1
Storage\Volume 2
IBM SurePOS XPE image build problem 1
Down loaded and ran nuidfltr.inf 1

Top