NLB ON TWO CLUSTERS

[Guest]

Hi Guys
I'm sure this is an interesting question. I have the following configuration:
Two W2K Clusters,, each of them has:
2 Dell PowerEdge 2650 (double Pentium Xeon 2.4 Ghz each)
1 Dell PowerVault 220s (SCSI External Extorage with 6 HD each on RAID5)
The two clusters are connected to a Dell PowerConnect 3348 Switch

Each cluster has a Generic Windows Service running inside the Cluster Service (but only one Node at a time on each cluster has the Generic Service running)

My question: Is there any way to install NLB on those two cluster so the incoming traffic gets distribuited among them?.

Thanks so much for your help.
MM...

 

[Marc Reynolds [MSFT]]

Nope, you cannot run NLB and Cluster on the same box.

235305 Windows 2000 Interoperability Between MSCS and NLB
http://support.microsoft.com/?id=235305



--

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.

Hi Guys
I'm sure this is an interesting question. I have the following configuration:
Two W2K Clusters,, each of them has:
2 Dell PowerEdge 2650 (double Pentium Xeon 2.4 Ghz each)
1 Dell PowerVault 220s (SCSI External Extorage with 6 HD each on RAID5)
The two clusters are connected to a Dell PowerConnect 3348 Switch

Each cluster has a Generic Windows Service running inside the Cluster

Service (but only one Node at a time on each cluster has the Generic Service
running)

My question: Is there any way to install NLB on those two cluster so the

incoming traffic gets distribuited among them?.