Networking services will not start

[Guest]

Have a Compaq Presario running XP Pro with a Compaq provided NIC (which is working fine).
If I type ipconfig at a cmd prompt I get: "Command not supported. Unable to query routing information.
If I try to ping another PC I get "Unable to contact IP driver, error code 2
I've uninstalled the networking services (thru Add/Remove - Windows components) and reinstalled. When I did I got this error: "MSMQ Service cannot be started - Error code 0x42c" (I've searched my TechNet CDs AND the KB for this but nothing). When I check the various services (e.g., DHCP Client, TCP/IP, etc.) they are set to automatic but not started. When I try to start one of them I get an "Error 1068 - The dependency service or group failed to start" (doesn't tell you WHAT service or group it is). If I check the system configuration utility - ALL services are checked to start
I've even put a new NIC in the machine (Linksys) thinking that was it - still the same results.
I've run the repair function from the XP Pro CD - that didn't solve it. I've installed SP1 - that didn't help
If anyone has any clue as to what's wrong here I sure would appreciate your advice. I can be reached via e-mail at (e-mail address removed) - or simply reply to this post
Thanks.

 

[yellowpike]

Hello Dennis
Found this KB
http://support.microsoft.com/default.aspx?scid=kb;en-us;827328&Product=winxp
Hope it helps
regards
yellowpike

Have a Compaq Presario running XP Pro with a Compaq provided NIC (which is working fine).
If I type ipconfig at a cmd prompt I get: "Command not supported. Unable to query routing information."
If I try to ping another PC I get "Unable to contact IP driver, error code 2"
I've uninstalled the networking services (thru Add/Remove - Windows

components) and reinstalled. When I did I got this error: "MSMQ Service
cannot be started - Error code 0x42c" (I've searched my TechNet CDs AND the
KB for this but nothing). When I check the various services (e.g., DHCP
Client, TCP/IP, etc.) they are set to automatic but not started. When I try
to start one of them I get an "Error 1068 - The dependency service or group
failed to start" (doesn't tell you WHAT service or group it is). If I check
the system configuration utility - ALL services are checked to start.

I've even put a new NIC in the machine (Linksys) thinking that was it - still the same results.
I've run the repair function from the XP Pro CD - that didn't solve it.

I've installed SP1 - that didn't help.

If anyone has any clue as to what's wrong here I sure would appreciate

your advice. I can be reached via e-mail at (e-mail address removed) - or
simply reply to this post.

 

[andy_walsh777]

Hi Dennis

I was getting "MSMQ Service
cannot be started - Error code 0x42c", when I tried to install MSMQ,
and it also mentioned dependencies. I compared the "dependancies
(under services) on an "MSMQ" functioning system and found the onl
discrepancy was (on the functioning one) "NT LM Security Suppor
Provider" was set to Running and Manual. Where as on the no
functioning one "NT LM Security Support Provider" was set to disabled.
I set the non funnctioning one to manual and was able to install MSMQ.

I hope this helps you as well (nothing else out there is there!)

Cheers

Andy

*Hello Dennis
Found this KB
http://tinyurl.com/6raoy
Hope it helps
regards
yellowpike


(which is
working fine).
Unable
to query routing information."
error code
2"
Windows
components) and reinstalled. When I did I got this error: "MSM
Service
cannot be started - Error code 0x42c" (I've searched my TechNet CD
AND the
KB for this but nothing). When I check the various services (e.g.
DHCP
Client, TCP/IP, etc.) they are set to automatic but not started. Whe
I try
to start one of them I get an "Error 1068 - The dependency service o
group
failed to start" (doesn't tell you WHAT service or group it is). If
check
the system configuration utility - ALL services are checked t
start.
it -
still the same results.
it.
I've installed SP1 - that didn't help.
appreciate
your advice. I can be reached via e-mail at (e-mail address removed)
or
simply reply to this post.

-
andy_walsh77