Network Sharing Problems

[ukwildcat]

Machine 1 (Windows XP Pro) can see and share files with machine 2 and
machine 3. I can ping both machines with ip address and computer
name.

Machine 2 (Windows XP Pro Corporate) & machine 3 (Windows 2000 Pro)
can see machine 1 in network places, view workgroup computers, but
when I click on machine 1 I get the error message "network path not
found" machine 1 is not accessable. You may not have permission. I
can ping machine 1 from machine 2 & 3 but cannot ping using
computername. It acts like a name resolution issue. I have enabled
Netbios over TCP/IP and have disabled the firewall. All three
machines are members of the same workgroup and I am not using a
Domain. I have added the user account of machine 1 on machines 2 & 3
but still cannot access machine 1. When I go to the Event Viewer
after booting machine 1 I have the following error:

Event Type: Error
Event Source: NetBT
Event Category: None
Event ID: 4321
Date: 10/14/2003
Time: 10:29:49 PM
User: N/A
Computer: UKWILDCAT
Description:
The name "WORKGROUP :1d" could not be registered on the Interface
with IP address 192.168.2.100. The machine with the IP address
192.168.2.103 did not allow the name to be claimed by this machine.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 04 00 56 00 ......V.
0008: 00 00 00 00 e1 10 00 c0 ....á..À
0010: 01 01 00 00 01 00 00 c0 .......À
0018: 04 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

All three machines are connected to an SMC 2804WBR Barricade g24GHz 54
Mbps Wireless Cable/DSL Broadband Router. Machine 1 is using a Cat 5
wired connection. Machines 2 & 3 are using wireless connections.

I have read through many articles in this newsgroup and tried
everything mentioned with no success. Any help would be greatly
appreciated.

Thanks

 

[Guest]

I am having the same problem with XP and NT. However
after upgrading the XP Pro machine from 2000,which itself
was upgraded from NT, the XP Pro machine can't see any
computers on the network. Other XP and NT machines can
see the Pro machine but can't access it. All updates have
been done.

Can anyone out there figure this one out?

Thanks!