MUP.sys

  • Thread starter Thread starter AK
  • Start date Start date
A

AK

Hello,

I am using Zen 3.2 imaging, and am able to create and
restore the images fine. Once rebooting after the image
has been restored to the new machine, it dies EVERY time
when loading mup.sys - no matter the hardware
configuration (even the same machine that the image was
created on).

I've run SYSPREP, and re-imaged the machine - same
problem. Anyone have any ideas???

Thanks!
 
AK said:
Hello,

I am using Zen 3.2 imaging, and am able to create and
restore the images fine. Once rebooting after the image
has been restored to the new machine, it dies EVERY time
when loading mup.sys - no matter the hardware
configuration (even the same machine that the image was
created on).

I've run SYSPREP, and re-imaged the machine - same
problem. Anyone have any ideas???

Thanks!
Click to expand...

Perhaps your imaging program is not perfect. I would try
another product, e.g. Acronis DriveImage.
 
-----Original Message-----



Perhaps your imaging program is not perfect. I would try
another product, e.g. Acronis DriveImage.
Click to expand...

no, the image works fine when only the OS is installed -
this problem occurs when all the apps are installed...so
the image works fine - this is a Microsoft problem...go
figure... :)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Sysprep'ed image fails to boot after mup.sys loads 1
XP Image for Multiple Hardware Types 1
Can you use adminpassword to sysprep a sysprep'd computer? 2
XP SP2 image issue (mup.sys) 5
Single master image, sysprep, bsod, not what you think.. 7
Sysprep will not let me enter Key when image is restored. 4
Will Sysprep 'break' the machine I run it on? 1
Your grace period limit has been reached and will not be reset 0

Back
Top