MSconfig

G

Guest

I recently installed Windows 2000. When I used Windows 98 I was able to go into the run box and type msconfig and change the programs that loaded up when I started the system up. This option doesn't work in win2000. Do you know the command to access this screen so I can change from normal start up to selective start up.
 
J

Jim Byrd

Hi Sarge - There are several approaches you can use to make controlling the
Startup process easier in Win2k.

1) If you still have access to it, you can move a copy of the Win98 msconfig
to your \System\ folder and it will work - just ignore any complaints it
makes.

2) Much better, you can go here:

http://www.thetechguide.com/downloads.html (XP Version which works in Win2k
just fine) or here:

http://www.3feetunder.com/files/win2K_msconfig_setup.exe (stated to be a
Win2k Version - probably the same as the XP) or here:

http://www.techadvice.com/win2000/m/msconfig_w2k.htm and download msconfig.

3) As good, but different, is to go here:
http://www.mlin.net/StartupCPL.shtml and get Mike Lin's Startup Control
Panel applet. A somewhat more difficult to use but more extensive program
to do the same thing is StartupList from here:
http://www.lurkhere.com/~nicefiles/index.html, or even better, Autoruns from
here: http://www.sysinternals.com/ntw2k/source/misc.shtml#autoruns. Be
very careful about doing any Registry modifications directly unless you're
comfortable with this, and be sure that you BACKUP your Registry before
making any changes, so that you can recover if something goes wrong.
Changes made with StartUpCPL are less likely to cause problems, and are
usually a matter of just re-enabling the particular program. Another
program of this type that I can recommend is StartMan, free. You'll have to
get it here: http://www.pt.lu/comnet/files/utils/startman10396.exe, as the
pcforest site is, sadly, no longer in business. Another such free program
that I can highly recommend is StartupRun, here: http://nirsoft.cjb.net/,
particularly if you suspect malware problems. And finally, StartupCop,
here is excellent and allows you to set up multiple "startup profiles":
http://www.pchelp911.com/files/startcop.zip. If you have problems with
suspected hijackers, you can look up and investigate suspect programs in
your StartUp lists here:
http://www.pacs-portal.co.uk/startup_pages/startup_full.htm (Recommended)
http://www.3feetunder.com/krick/startup/list.html (Recommended)
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm (Recommended)


All work fine for controlling startups, however, I would recommend getting
both of the last two. They're both free, and each has some advantages. For
example, the XP msconfig also gives you some visibility/control over
services, while Mike's applet offers much better startup control.

Also, you should read and print out/save for future reference mskb article
Q179365 here:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;q179365 which will
tell you the order in which things get loaded.

Two additional resources which have useful information relating to startup
issues are:

How to Delay Loading of Specific Services
http://support.microsoft.com/default.aspx?scid=kb;en-us;193888

HOWTO: Control Device Driver Load Order
http://support.microsoft.com/support/kb/articles/Q115/4/86.asp


Perhaps this will help.


--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
 
P

Pegasus \(MVP\)

What a detailed and comprehensive reply!


Jim Byrd said:
Hi Sarge - There are several approaches you can use to make controlling the
Startup process easier in Win2k.

1) If you still have access to it, you can move a copy of the Win98 msconfig
to your \System\ folder and it will work - just ignore any complaints it
makes.

2) Much better, you can go here:

http://www.thetechguide.com/downloads.html (XP Version which works in Win2k
just fine) or here:

http://www.3feetunder.com/files/win2K_msconfig_setup.exe (stated to be a
Win2k Version - probably the same as the XP) or here:

http://www.techadvice.com/win2000/m/msconfig_w2k.htm and download msconfig.

3) As good, but different, is to go here:
http://www.mlin.net/StartupCPL.shtml and get Mike Lin's Startup Control
Panel applet. A somewhat more difficult to use but more extensive program
to do the same thing is StartupList from here:
http://www.lurkhere.com/~nicefiles/index.html, or even better, Autoruns from
here: http://www.sysinternals.com/ntw2k/source/misc.shtml#autoruns. Be
very careful about doing any Registry modifications directly unless you're
comfortable with this, and be sure that you BACKUP your Registry before
making any changes, so that you can recover if something goes wrong.
Changes made with StartUpCPL are less likely to cause problems, and are
usually a matter of just re-enabling the particular program. Another
program of this type that I can recommend is StartMan, free. You'll have to
get it here: http://www.pt.lu/comnet/files/utils/startman10396.exe, as the
pcforest site is, sadly, no longer in business. Another such free program
that I can highly recommend is StartupRun, here: http://nirsoft.cjb.net/,
particularly if you suspect malware problems. And finally, StartupCop,
here is excellent and allows you to set up multiple "startup profiles":
http://www.pchelp911.com/files/startcop.zip. If you have problems with
suspected hijackers, you can look up and investigate suspect programs in
your StartUp lists here:
http://www.pacs-portal.co.uk/startup_pages/startup_full.htm (Recommended)
http://www.3feetunder.com/krick/startup/list.html (Recommended)
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm (Recommended)


All work fine for controlling startups, however, I would recommend getting
both of the last two. They're both free, and each has some advantages. For
example, the XP msconfig also gives you some visibility/control over
services, while Mike's applet offers much better startup control.

Also, you should read and print out/save for future reference mskb article
Q179365 here:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;q179365 which will
tell you the order in which things get loaded.

Two additional resources which have useful information relating to startup
issues are:

How to Delay Loading of Specific Services
http://support.microsoft.com/default.aspx?scid=kb;en-us;193888

HOWTO: Control Device Driver Load Order
http://support.microsoft.com/support/kb/articles/Q115/4/86.asp


Perhaps this will help.


--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In when know
 
J

Jim Byrd

Thanks, Pegasus! Feel free to adopt/adapt if/as you see fit. :)

--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
 
D

dcdon

Dang, I'm impressed, Jim...
That comes close to being as good as Pegasus.

hehe,
don
]
=============
Hi Sarge - There are several approaches you can use to make
controlling the
Startup process easier in Win2k.

1) If you still have access to it, you can move a copy of
the Win98 msconfig
to your \System\ folder and it will work - just ignore any
complaints it
makes.

2) Much better, you can go here:

http://www.thetechguide.com/downloads.html (XP Version which
works in Win2k
just fine) or here:

http://www.3feetunder.com/files/win2K_msconfig_setup.exe
(stated to be a
Win2k Version - probably the same as the XP) or here:

http://www.techadvice.com/win2000/m/msconfig_w2k.htm and
download msconfig.

3) As good, but different, is to go here:
http://www.mlin.net/StartupCPL.shtml and get Mike Lin's
Startup Control
Panel applet. A somewhat more difficult to use but more
extensive program
to do the same thing is StartupList from here:
http://www.lurkhere.com/~nicefiles/index.html, or even
better, Autoruns from
here:
http://www.sysinternals.com/ntw2k/source/misc.shtml#autoruns.
Be
very careful about doing any Registry modifications directly
unless you're
comfortable with this, and be sure that you BACKUP your
Registry before
making any changes, so that you can recover if something
goes wrong.
Changes made with StartUpCPL are less likely to cause
problems, and are
usually a matter of just re-enabling the particular program.
Another
program of this type that I can recommend is StartMan, free.
You'll have to
get it here:
http://www.pt.lu/comnet/files/utils/startman10396.exe, as
the
pcforest site is, sadly, no longer in business. Another
such free program
that I can highly recommend is StartupRun, here:
http://nirsoft.cjb.net/,
particularly if you suspect malware problems. And finally,
StartupCop,
here is excellent and allows you to set up multiple "startup
profiles":
http://www.pchelp911.com/files/startcop.zip. If you have
problems with
suspected hijackers, you can look up and investigate suspect
programs in
your StartUp lists here:
http://www.pacs-portal.co.uk/startup_pages/startup_full.htm
(Recommended)
http://www.3feetunder.com/krick/startup/list.html
(Recommended)
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm
(Recommended)


All work fine for controlling startups, however, I would
recommend getting
both of the last two. They're both free, and each has some
advantages. For
example, the XP msconfig also gives you some
visibility/control over
services, while Mike's applet offers much better startup
control.

Also, you should read and print out/save for future
reference mskb article
Q179365 here:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;q179365
which will
tell you the order in which things get loaded.

Two additional resources which have useful information
relating to startup
issues are:

How to Delay Loading of Specific Services
http://support.microsoft.com/default.aspx?scid=kb;en-us;193888

HOWTO: Control Device Driver Load Order
http://support.microsoft.com/support/kb/articles/Q115/4/86.asp


Perhaps this will help.


--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
sgtdaddp said:
I recently installed Windows 2000. When I used Windows 98
I was able to
go into
the run box and type msconfig and change the programs that
loaded up when
I
started the system up. This option doesn't work in
win2000. Do you know
the
command to access this screen so I can change from normal
start up to
selective
 
J

Jim Byrd

HI Don - I'm surprised that everyone is apparently just seeing this now.
I've been using this "canned" post (or something very like it) for this FAQ
for over two years in this group IIRC. :)

--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
dcdon said:
Dang, I'm impressed, Jim...
That comes close to being as good as Pegasus.

hehe,
don
]
=============
Hi Sarge - There are several approaches you can use to make
controlling the
Startup process easier in Win2k.

1) If you still have access to it, you can move a copy of
the Win98 msconfig
to your \System\ folder and it will work - just ignore any
complaints it
makes.

2) Much better, you can go here:

http://www.thetechguide.com/downloads.html (XP Version which
works in Win2k
just fine) or here:

http://www.3feetunder.com/files/win2K_msconfig_setup.exe
(stated to be a
Win2k Version - probably the same as the XP) or here:

http://www.techadvice.com/win2000/m/msconfig_w2k.htm and
download msconfig.

3) As good, but different, is to go here:
http://www.mlin.net/StartupCPL.shtml and get Mike Lin's
Startup Control
Panel applet. A somewhat more difficult to use but more
extensive program
to do the same thing is StartupList from here:
http://www.lurkhere.com/~nicefiles/index.html, or even
better, Autoruns from
here:
http://www.sysinternals.com/ntw2k/source/misc.shtml#autoruns.
Be
very careful about doing any Registry modifications directly
unless you're
comfortable with this, and be sure that you BACKUP your
Registry before
making any changes, so that you can recover if something
goes wrong.
Changes made with StartUpCPL are less likely to cause
problems, and are
usually a matter of just re-enabling the particular program.
Another
program of this type that I can recommend is StartMan, free.
You'll have to
get it here:
http://www.pt.lu/comnet/files/utils/startman10396.exe, as
the
pcforest site is, sadly, no longer in business. Another
such free program
that I can highly recommend is StartupRun, here:
http://nirsoft.cjb.net/,
particularly if you suspect malware problems. And finally,
StartupCop,
here is excellent and allows you to set up multiple "startup
profiles":
http://www.pchelp911.com/files/startcop.zip. If you have
problems with
suspected hijackers, you can look up and investigate suspect
programs in
your StartUp lists here:
http://www.pacs-portal.co.uk/startup_pages/startup_full.htm
(Recommended)
http://www.3feetunder.com/krick/startup/list.html
(Recommended)
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm
(Recommended)


All work fine for controlling startups, however, I would
recommend getting
both of the last two. They're both free, and each has some
advantages. For
example, the XP msconfig also gives you some
visibility/control over
services, while Mike's applet offers much better startup
control.

Also, you should read and print out/save for future
reference mskb article
Q179365 here:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;q179365
which will
tell you the order in which things get loaded.

Two additional resources which have useful information
relating to startup
issues are:

How to Delay Loading of Specific Services
http://support.microsoft.com/default.aspx?scid=kb;en-us;193888

HOWTO: Control Device Driver Load Order
http://support.microsoft.com/support/kb/articles/Q115/4/86.asp


Perhaps this will help.



In
sgtdaddp said:
I recently installed Windows 2000. When I used Windows 98
I was able to
go into
the run box and type msconfig and change the programs that
loaded up when
I
started the system up. This option doesn't work in
win2000. Do you know
the
command to access this screen so I can change from normal
start up to
selective
start up.
 
S

Steve Parry [MVP]

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top