MRxSmb error 3034

  • Thread starter Thread starter Peter Kaufman
  • Start date Start date
P

Peter Kaufman

Hi,

W2K SP4. Exchange 2K.

I am trying to track down why I get this error on 1 of my 3 servers
every hour. This is one of the 2 DCs.

I know it is usually related to either DNS or Kerberos, but can't find
anything wrong there.

My question is, what process would be taking place every hour on the
hour that either uses Kerberos or has something to do with the DNS
service?

Thanks a lot,

Peter
 
Hi Peter,

Thanks for your posting. Please refer to the following article:

263142 Determining the Cause of an "MRxSmb 3034" Warning
http://support.microsoft.com/?id=263142

1. Open the particular 3034 event in the System event log.

2. In the Data box, click Words.

3. The status code that resulted in the 3034 error is contained in the
last DWORD entry in the list.

4. The status code may be either a Win32 or a Windows NT status code.
You can look these up in either Winerror.h or Ntstatus.h, respectively.
Both of these files are located in the Windows SDK.
~~~~~

If you need further assistance, you can send the event logs (save them as
*.evt) to me at (e-mail address removed) for further research.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
 
Hi Peter,

I'm just checking to see if the info provided was helpful. If you have any
questions or concerns, please don't hesitate to let us know.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
X-Tomcat-ID: 230511694
References: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
From: (e-mail address removed) (William Wang[MSFT])
Organization: Microsoft
Date: Fri, 26 Mar 2004 07:07:03 GMT
Subject: RE: MRxSmb error 3034
X-Tomcat-NG: microsoft.public.win2000.general
Message-ID: <[email protected]>
Newsgroups: microsoft.public.win2000.general
Lines: 57
Path: cpmsftngxa06.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:128310
NNTP-Posting-Host: TOMCATIMPORT1 10.201.218.122

Hi Peter,

Thanks for your posting. Please refer to the following article:

263142 Determining the Cause of an "MRxSmb 3034" Warning
http://support.microsoft.com/?id=263142

1. Open the particular 3034 event in the System event log.

2. In the Data box, click Words.

3. The status code that resulted in the 3034 error is contained in the
last DWORD entry in the list.

4. The status code may be either a Win32 or a Windows NT status code.
You can look these up in either Winerror.h or Ntstatus.h, respectively.
Both of these files are located in the Windows SDK.
~~~~~

If you need further assistance, you can send the event logs (save them as
*.evt) to me at (e-mail address removed) for further research.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: Peter Kaufman <[email protected]>
Subject: MRxSmb error 3034
Date: Thu, 25 Mar 2004 14:27:52 +0700
Message-ID: <[email protected]>
X-Newsreader: Forte Agent 1.92/32.572
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Newsgroups: microsoft.public.win2000.general
NNTP-Posting-Host: 203.147.59.93
Lines: 1
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGXS01.phx.gbl!TK2MSFTNGXA05.phx.gbl!TK2MSFTNGP
Click to expand...
0
8.phx.gbl!TK2MSFTNGP10.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:128090
X-Tomcat-NG: microsoft.public.win2000.general

Hi,

W2K SP4. Exchange 2K.

I am trying to track down why I get this error on 1 of my 3 servers
every hour. This is one of the 2 DCs.

I know it is usually related to either DNS or Kerberos, but can't find
anything wrong there.

My question is, what process would be taking place every hour on the
hour that either uses Kerberos or has something to do with the DNS
service?

Thanks a lot,

Peter
Click to expand...
Click to expand...
 
Hi William,

Sorry for the delay in responding - I had to deal with other issues.
I found some more info by running netmon - the error was simultaneous
with another DC trying to contact this one. There was an SMB error:
code(22) status_more_processing_required

Curiously, since running the trace, the error has not reappeared!
However, do you have any ideas what this means?

Thanks,

Peter

Hi Peter,

I'm just checking to see if the info provided was helpful. If you have any
questions or concerns, please don't hesitate to let us know.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
X-Tomcat-ID: 230511694
References: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
From: (e-mail address removed) (William Wang[MSFT])
Organization: Microsoft
Date: Fri, 26 Mar 2004 07:07:03 GMT
Subject: RE: MRxSmb error 3034
X-Tomcat-NG: microsoft.public.win2000.general
Message-ID: <[email protected]>
Newsgroups: microsoft.public.win2000.general
Lines: 57
Path: cpmsftngxa06.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:128310
NNTP-Posting-Host: TOMCATIMPORT1 10.201.218.122

Hi Peter,

Thanks for your posting. Please refer to the following article:

263142 Determining the Cause of an "MRxSmb 3034" Warning
http://support.microsoft.com/?id=263142

1. Open the particular 3034 event in the System event log.

2. In the Data box, click Words.

3. The status code that resulted in the 3034 error is contained in the
last DWORD entry in the list.

4. The status code may be either a Win32 or a Windows NT status code.
You can look these up in either Winerror.h or Ntstatus.h, respectively.
Both of these files are located in the Windows SDK.
~~~~~

If you need further assistance, you can send the event logs (save them as
*.evt) to me at (e-mail address removed) for further research.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: Peter Kaufman <[email protected]>
Subject: MRxSmb error 3034
Date: Thu, 25 Mar 2004 14:27:52 +0700
Message-ID: <[email protected]>
X-Newsreader: Forte Agent 1.92/32.572
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Newsgroups: microsoft.public.win2000.general
NNTP-Posting-Host: 203.147.59.93
Lines: 1
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGXS01.phx.gbl!TK2MSFTNGXA05.phx.gbl!TK2MSFTNGP
Click to expand...
0
8.phx.gbl!TK2MSFTNGP10.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:128090
X-Tomcat-NG: microsoft.public.win2000.general

Hi,

W2K SP4. Exchange 2K.

I am trying to track down why I get this error on 1 of my 3 servers
every hour. This is one of the 2 DCs.

I know it is usually related to either DNS or Kerberos, but can't find
anything wrong there.

My question is, what process would be taking place every hour on the
hour that either uses Kerberos or has something to do with the DNS
service?

Thanks a lot,

Peter
Click to expand...
Click to expand...
Click to expand...
 
Hi Peter,

Thanks for your update. According to my research, it may be caused by
duplicate machine accounts. You may want to check this. Anyway, I'm glad to
hear the issue has gone.

Please feel free let us know if you have any questions at any time.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: Peter Kaufman <[email protected]>
Subject: Re: MRxSmb error 3034
Date: Wed, 31 Mar 2004 13:14:59 +0700
Message-ID: <[email protected]>
References: <[email protected]>
Click to expand...
X-Newsreader: Forte Agent 1.92/32.572
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Newsgroups: microsoft.public.win2000.general
NNTP-Posting-Host: 203.147.59.25
Lines: 1
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP10.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:129316
X-Tomcat-NG: microsoft.public.win2000.general

Hi William,

Sorry for the delay in responding - I had to deal with other issues.
I found some more info by running netmon - the error was simultaneous
with another DC trying to contact this one. There was an SMB error:
code(22) status_more_processing_required

Curiously, since running the trace, the error has not reappeared!
However, do you have any ideas what this means?

Thanks,

Peter

Hi Peter,

I'm just checking to see if the info provided was helpful. If you have any
questions or concerns, please don't hesitate to let us know.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
X-Tomcat-ID: 230511694
References: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
From: (e-mail address removed) (William Wang[MSFT])
Organization: Microsoft
Date: Fri, 26 Mar 2004 07:07:03 GMT
Subject: RE: MRxSmb error 3034
X-Tomcat-NG: microsoft.public.win2000.general
Message-ID: <[email protected]>
Newsgroups: microsoft.public.win2000.general
Lines: 57
Path: cpmsftngxa06.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:128310
NNTP-Posting-Host: TOMCATIMPORT1 10.201.218.122

Hi Peter,

Thanks for your posting. Please refer to the following article:

263142 Determining the Cause of an "MRxSmb 3034" Warning
http://support.microsoft.com/?id=263142

1. Open the particular 3034 event in the System event log.

2. In the Data box, click Words.

3. The status code that resulted in the 3034 error is contained in the
last DWORD entry in the list.

4. The status code may be either a Win32 or a Windows NT status code.
You can look these up in either Winerror.h or Ntstatus.h, respectively.
Both of these files are located in the Windows SDK.
~~~~~

If you need further assistance, you can send the event logs (save them as
*.evt) to me at (e-mail address removed) for further research.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: Peter Kaufman <[email protected]>
Subject: MRxSmb error 3034
Date: Thu, 25 Mar 2004 14:27:52 +0700
Message-ID: <[email protected]>
X-Newsreader: Forte Agent 1.92/32.572
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Newsgroups: microsoft.public.win2000.general
NNTP-Posting-Host: 203.147.59.93
Lines: 1
Path:
cpmsftngxa06.phx.gbl!TK2MSFTNGXS01.phx.gbl!TK2MSFTNGXA05.phx.gbl!TK2MSFTN
Click to expand...
GP
0
8.phx.gbl!TK2MSFTNGP10.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:128090
X-Tomcat-NG: microsoft.public.win2000.general

Hi,

W2K SP4. Exchange 2K.

I am trying to track down why I get this error on 1 of my 3 servers
every hour. This is one of the 2 DCs.

I know it is usually related to either DNS or Kerberos, but can't find
anything wrong there.

My question is, what process would be taking place every hour on the
hour that either uses Kerberos or has something to do with the DNS
service?

Thanks a lot,

Peter
Click to expand...
Click to expand...
Click to expand...
 
When viewing a netmon trace it is normal to see
status_more_processing_required returned from a variety of operations.
Unless other data in the trace indicates a problem in association with this
then it can generally be ignored.

--
J.C. Hornbeck, MCSE
Microsoft Product Support

NOTE: Please reply to the newsgroup and not directly to me. This allows
others to add to and benefit from these threads and also helps to ensure a
more timely response. Thank you!

This posting is provided "AS IS" without warranty either expressed or
implied, including, but not limited to, the implied warranties of
merchantability or fitness for a particular purpose.

Peter Kaufman said:
Hi William,

Sorry for the delay in responding - I had to deal with other issues.
I found some more info by running netmon - the error was simultaneous
with another DC trying to contact this one. There was an SMB error:
code(22) status_more_processing_required

Curiously, since running the trace, the error has not reappeared!
However, do you have any ideas what this means?

Thanks,

Peter

Hi Peter,

I'm just checking to see if the info provided was helpful. If you have any
questions or concerns, please don't hesitate to let us know.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
X-Tomcat-ID: 230511694
References: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
From: (e-mail address removed) (William Wang[MSFT])
Organization: Microsoft
Date: Fri, 26 Mar 2004 07:07:03 GMT
Subject: RE: MRxSmb error 3034
X-Tomcat-NG: microsoft.public.win2000.general
Message-ID: <[email protected]>
Newsgroups: microsoft.public.win2000.general
Lines: 57
Path: cpmsftngxa06.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.general:128310
NNTP-Posting-Host: TOMCATIMPORT1 10.201.218.122

Hi Peter,

Thanks for your posting. Please refer to the following article:

263142 Determining the Cause of an "MRxSmb 3034" Warning
http://support.microsoft.com/?id=263142

1. Open the particular 3034 event in the System event log.

2. In the Data box, click Words.

3. The status code that resulted in the 3034 error is contained in the
last DWORD entry in the list.

4. The status code may be either a Win32 or a Windows NT status code.
You can look these up in either Winerror.h or Ntstatus.h, respectively.
Both of these files are located in the Windows SDK.
~~~~~

If you need further assistance, you can send the event logs (save them as
*.evt) to me at (e-mail address removed) for further research.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: Peter Kaufman <[email protected]>
Subject: MRxSmb error 3034
Date: Thu, 25 Mar 2004 14:27:52 +0700
Message-ID: <[email protected]>
X-Newsreader: Forte Agent 1.92/32.572
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Newsgroups: microsoft.public.win2000.general
NNTP-Posting-Host: 203.147.59.93
Lines: 1
Path:
Click to expand...
Click to expand...
cpmsftngxa06.phx.gbl!TK2MSFTNGXS01.phx.gbl!TK2MSFTNGXA05.phx.gbl!TK2MSFTNG P
0
Click to expand...
Click to expand...
 
Hi Peter,

I'm just checking to see if there is anything else we can do for you here.
Please don't hesitate to let us know if you have any questions at any time.

Sincerely,

William Wang
Microsoft Online Support Engineer

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

mrxsmb id 3034 2
MRxSmB - Event ID 3034 2
event 3034 MRxSmb fills my system log 1
Event ID Error 3034 1
MrxSmb 3034 event log warning with C00000E5 error code 1
cryptographic service not running 3
Kerberos won't start 2
Event 3034 on Exchange Server 1

Back
Top