Modem and other on same serial, alternately?

  • Thread starter Thread starter Rick
  • Start date Start date
R

Rick

I am planning to purchase an external USR.
Also, I just acquired a cable to connect my Nokia to my PC.
Can I use the serial port for the modem primarily, and sometimes switch
cables to the Nokia serial cable for a few minutes?
TIA,
Rick
 
I am planning to purchase an external USR.
Also, I just acquired a cable to connect my Nokia to my PC.
Can I use the serial port for the modem primarily, and sometimes switch
cables to the Nokia serial cable for a few minutes?
TIA,
Rick

I don't see why not. I have a switch box and switch to several serial
devices. YOu do need to make sure that you are not running a subroutine
program that looks for the camera or other device on the port. Just call up
the program as needed for the device you hook to the serial port.
 
Ralph Mowery said:
I don't see why not. I have a switch box and switch to several serial
devices. YOu do need to make sure that you are not running a subroutine
program that looks for the camera or other device on the port. Just call up
the program as needed for the device you hook to the serial port.
Ralph, thanks for your response.
Your answer sounds good, so I'll get the external.
Rick
 
Plug and Play may not see modem on powerup and not configure
for modem. Cheap and easy solution is another serial port.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top