mapped drives connect but i can't see the network

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have a network of 6 computers 1 server running 2003
server and 5 with win 2000 when the workstations are
started the drives map ok & I can browse those drives but
when I try to go to computers near me it says that the
workgroup is unavailable has anyone got any ideas.
pinging shows all ip addresses
 
What happens if you start all the computers on the network and then walk
away for 15 minutes or so? If you can browse then, you are the victim of a
browse master election process. There's no harm in it - as you know, your
mapped drives work; only browsing the network is unavailable. You can
remedy it by setting one computer (probably the 2003 Server) as the browse
master and disabling browse master on all the other computers - but it
probably isn't worth the hassle.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Can map network drive but not browse directory 2
VPN client connects but cannot ping/map drives 3
map network drive 7
WinXP PC loses connection to the mapped Network Drive S:\ 1
loss of network connectivity after mapping drive 1
Can't map drives over multi-homed network (VPN) 4
Can not map a shared drive. 1
Not able to log into Win2K server 2

Back
Top