management tool problems

[Guest]

hello i have set up my mn700 properly and everything is working , but the
problem i can not open the management tool the internet explorer just shows a
white blank scree and nothing happens, please help as i need to change some
few things

 

[Luke]

Hi

Try the following:

Start > Run > 'mmc'

Then... File > Add/Remove Snap-in > Add

You should be able to access any of the managements tools this way.

Hope this helps,
Luke

 

[Guest]

sorry luke but i get a list of things to add , waht should i choose to add

 

[Luke]

Hi

The list of items you get are all of the managment tools available in
Windows XP. What did you want to manage exactly? Try clicking on an
item and reading its description at the bottom for more info.

If you need further assistance don't hesitate to ask,
Luke

 

[Guest]

"the management tool i need is the one for the mn700 router , i.e the one
you access by typing 192.168.2.1 , i do that but the web page just becomes
white and nothing happens after until it gives up, nothing loads up please
help me

 

[Chuck]

hello i have set up my mn700 properly and everything is working , but the
problem i can not open the management tool the internet explorer just shows a
white blank scree and nothing happens, please help as i need to change some
few things

Maskal,

You're looking for the router management web page? You have 3 possible
problems:
1) Wrong router ip address.
2) Wrong router port.
3) The router web server is not working. Try powering the router off then on.

For my router web server (not MN700), I would access http://192.168.202.1:88/.
Read your router manual, see if you made a mistake. Ping the ip address, see if
you have the right one.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
My email is AT DOT
actual address pchuck sonic net.

 

[FredP]

maskal ... your router is a Microsoft router and there is a specific
newsgroup for MS wireless hardware that might have readers with ready
answers for your question. Try going to:
microsoft.public.broadbandnet.hardware

I, myself, an not sure why you're seeing a white screen but are you
typing in:
http://192.168.2.1/login.htm

.... and are you sure the gateway address is correct? That one normally
is the default but may have been changed. If all else fails, I would
re-install the MS broadband networking 'Setup and Utility' program from
the cd. If you don't have the cd, try downloading the MSBNsoftware
directly from MS at:
http://www.microsoft.com/hardware/broadbandnetworking/10_DLoadMain.mspx