LUNs and Drives

[Guest]

I have SAN with LUN 0-10
And I have 8 drives configured using those LUNs.

Is there any way to check what drive is using what LUN number? Either
through disk manager or some other way?

For performance reasons, I don't want to use a drive spanning two LUNs. I'm
using WIndows 2000 server.

To check which lun a drive is using, i went into properties of disk and
clicked 'hardware' tab. However it lists ALL the luns.

Thanks in advance

 

[Guest]

I found it!!

Under disk management, you have to right click on DISK number and look at
properties. I was looking at the properties of drive letters under disk
management.

JFYI