Localization toolkit

[Rental]

I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationManagement.exe, I get an exception:
--->Unable to generate loose file resources




Gordon






Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH
Message 2 in thread
From: Todd Abel [MSFT] ([email protected])
Subject: RE: Unable to generate loose file resources, Localization
Toolkit


View this article only
Newsgroups: microsoft.public.dotnet.framework
Date: 2003-09-29 18:48:08 PST


The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
([email protected]) and questions are often answered.

Todd.

--------------------

 

[marius]

Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

...and voilà! It all ran smoothly!

Good luck!
Marius

I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationManagement.exe, I get an exception:
--->Unable to generate loose file resources




Gordon






Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH
Message 2 in thread
From: Todd Abel [MSFT] ([email protected])
Subject: RE: Unable to generate loose file resources, Localization
Toolkit


View this article only
Newsgroups: microsoft.public.dotnet.framework
Date: 2003-09-29 18:48:08 PST


The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
([email protected]) and questions are often answered.

Todd.

--------------------

From: "Marius Horak" <[email protected]>
Subject: Unable to generate loose file resources, Localization Toolkit
Date: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <[email protected]>
Newsgroups: microsoft.public.dotnet.framework
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.dotnet.framework:54392
X-Tomcat-NG: microsoft.public.dotnet.framework

Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH

 

[Rental]

Hi Marius.


Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.



Cheers,


Gordon

Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationManagement.exe, I get an exception:
--->Unable to generate loose file resources




Gordon






Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH
Message 2 in thread
From: Todd Abel [MSFT] ([email protected])
Subject: RE: Unable to generate loose file resources, Localization
Toolkit


View this article only
Newsgroups: microsoft.public.dotnet.framework
Date: 2003-09-29 18:48:08 PST


The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
([email protected]) and questions are often answered.

Todd.

--------------------

From: "Marius Horak" <[email protected]>
Subject: Unable to generate loose file resources, Localization Toolkit
Date: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <[email protected]>
Newsgroups: microsoft.public.dotnet.framework
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.dotnet.framework:54392
X-Tomcat-NG: microsoft.public.dotnet.framework

Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH

 

[marius]

Hi Gordon,
Just happy to help!

Perhaps you can help me as well.
I've run into some problems using the localization toolkit.
When I try to inherit from it in the aspx-pages, either by:
Inherits="Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage" in
the @page-directive, or by:
public class LocTest1 :
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage
in the codebehind, I just the familiar error:
"Object reference not set to an instance of an object"
in the Microsoft.Toolkits.EnterpriseLocalization.Settings-class (see
below).
Any ideas?

Rgds
Marius

Error:
NullReferenceException: Object reference not set to an instance of an
object.]
Microsoft.Toolkits.EnterpriseLocalization.Settings.get_CurrentManager()
+222
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.ProcessControl(Control
c, ArrayList affectedControls, Boolean includeChildren) +28
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.IterateControls(ControlCollection
controls, ArrayList affectedControls) +35
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.ProcessControl(Control
c, ArrayList affectedControls, Boolean includeChildren) +110
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.IterateControls(ControlCollection
controls, ArrayList affectedControls) +35
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.OnPreRender(EventArgs
evt) +158
System.Web.UI.Control.PreRenderRecursiveInternal() +62
System.Web.UI.Page.ProcessRequestMain() +1489

Hi Marius.


Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.



Cheers,


Gordon

Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationManagement.exe, I get an exception:
--->Unable to generate loose file resources




Gordon






Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH
Message 2 in thread
From: Todd Abel [MSFT] ([email protected])
Subject: RE: Unable to generate loose file resources, Localization
Toolkit


View this article only
Newsgroups: microsoft.public.dotnet.framework
Date: 2003-09-29 18:48:08 PST


The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
([email protected]) and questions are often answered.

Todd.

--------------------
From: "Marius Horak" <[email protected]>
Subject: Unable to generate loose file resources, Localization Toolkit
Date: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <[email protected]>
Newsgroups: microsoft.public.dotnet.framework
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.dotnet.framework:54392
X-Tomcat-NG: microsoft.public.dotnet.framework

Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH

 

[gmanupnorth]

Hi Marius.


Could you possibly send or post some of the code if you are still
having the problem you mentioned in your previous post. This would
make it easier for me to determine what the problem might be.



Gordon

Hi Gordon,
Just happy to help!

Perhaps you can help me as well.
I've run into some problems using the localization toolkit.
When I try to inherit from it in the aspx-pages, either by:
Inherits="Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage" in
the @page-directive, or by:
public class LocTest1 :
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage
in the codebehind, I just the familiar error:
"Object reference not set to an instance of an object"
in the Microsoft.Toolkits.EnterpriseLocalization.Settings-class (see
below).
Any ideas?

Rgds
Marius

Error:
NullReferenceException: Object reference not set to an instance of an
object.]
Microsoft.Toolkits.EnterpriseLocalization.Settings.get_CurrentManager()
+222
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.ProcessControl(Control
c, ArrayList affectedControls, Boolean includeChildren) +28
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.IterateControls(ControlCollection
controls, ArrayList affectedControls) +35
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.ProcessControl(Control
c, ArrayList affectedControls, Boolean includeChildren) +110
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.IterateControls(ControlCollection
controls, ArrayList affectedControls) +35
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.OnPreRender(EventArgs
evt) +158
System.Web.UI.Control.PreRenderRecursiveInternal() +62
System.Web.UI.Page.ProcessRequestMain() +1489

Hi Marius.


Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.



Cheers,


Gordon

Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

(e-mail address removed) (Rental) wrote in message I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationManagement.exe, I get an exception:
--->Unable to generate loose file resources




Gordon






Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH
Message 2 in thread
From: Todd Abel [MSFT] ([email protected])
Subject: RE: Unable to generate loose file resources, Localization
Toolkit


View this article only
Newsgroups: microsoft.public.dotnet.framework
Date: 2003-09-29 18:48:08 PST


The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
([email protected]) and questions are often answered.

Todd.

--------------------
From: "Marius Horak" <[email protected]>
Subject: Unable to generate loose file resources, Localization Toolkit
Date: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <[email protected]>
Newsgroups: microsoft.public.dotnet.framework
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.dotnet.framework:54392
X-Tomcat-NG: microsoft.public.dotnet.framework

Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH

 

[marius]

Hi Gordon,
Thanx, but I've ended up not using the Localization Toolkit. It seemed
to be too unstable/errorprone, so I went back to doing it with a
hierarchy of resource files (string.resx, string.no.resx etc).

All my attempts to access properties threw errors. I couldn't get the
elementresourceset either, and could only use resourcemanagers
getString(). That worked on elements text-attributes, but then again,
that wasn't how I'd intended to use this.

Marius

Hi Marius.


Could you possibly send or post some of the code if you are still
having the problem you mentioned in your previous post. This would
make it easier for me to determine what the problem might be.



Gordon

Hi Gordon,
Just happy to help!

Perhaps you can help me as well.
I've run into some problems using the localization toolkit.
When I try to inherit from it in the aspx-pages, either by:
Inherits="Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage" in
the @page-directive, or by:
public class LocTest1 :
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage
in the codebehind, I just the familiar error:
"Object reference not set to an instance of an object"
in the Microsoft.Toolkits.EnterpriseLocalization.Settings-class (see
below).
Any ideas?

Rgds
Marius

Error:
NullReferenceException: Object reference not set to an instance of an
object.]
Microsoft.Toolkits.EnterpriseLocalization.Settings.get_CurrentManager()
+222
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.ProcessControl(Control
c, ArrayList affectedControls, Boolean includeChildren) +28
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.IterateControls(ControlCollection
controls, ArrayList affectedControls) +35
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.ProcessControl(Control
c, ArrayList affectedControls, Boolean includeChildren) +110
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.IterateControls(ControlCollection
controls, ArrayList affectedControls) +35
Microsoft.Toolkits.EnterpriseLocalization.LocalizedPage.OnPreRender(EventArgs
evt) +158
System.Web.UI.Control.PreRenderRecursiveInternal() +62
System.Web.UI.Page.ProcessRequestMain() +1489

Hi Marius.


Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.



Cheers,


Gordon


(e-mail address removed) (marius) wrote in message Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

(e-mail address removed) (Rental) wrote in message I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationManagement.exe, I get an exception:
--->Unable to generate loose file resources




Gordon






Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH
Message 2 in thread
From: Todd Abel [MSFT] ([email protected])
Subject: RE: Unable to generate loose file resources, Localization
Toolkit


View this article only
Newsgroups: microsoft.public.dotnet.framework
Date: 2003-09-29 18:48:08 PST


The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
([email protected]) and questions are often answered.

Todd.

--------------------
From: "Marius Horak" <[email protected]>
Subject: Unable to generate loose file resources, Localization Toolkit
Date: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <[email protected]>
Newsgroups: microsoft.public.dotnet.framework
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.dotnet.framework:54392
X-Tomcat-NG: microsoft.public.dotnet.framework

Error as above.

Does anyone know how to fix it?


Searched NG for that problem and this is what I found:

===================================================
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationManagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

==================================================

How long can it take to find someone who knows the answer?
I'm desperate.


MH