Thanks for trying to address this Joseph but i have all the right drivers
from Toshiba but what i have narrowed it down to is this (sorry for the long
one ) .
I have Equium M50 (59E) and got bitten by an update that took out my
touchpad and keyboard .I have made fresh install of XP Home and have all
updated drivers and all is going well .The last update i cant seem to fathom
is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host
Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a
recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed
allready and when i do this it knocks off my USB mouse leaving me not able to
install the new ones .When i reboot it installs the ones i dont want
reinstalled .
This is the read me off the new update and realy it is beyond me to
underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
--------------------------------------------------------------------------------
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<
http://www.microsoft.com/downloads/...familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
--------------------------------------------------------------------------------
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
--------------------------------------------------------------------------------
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
--------------------------------------------------------------------------------
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
--------------------------------------------------------------------------------
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
--------------------------------------------------------------------------------
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
--------------------------------------------------------------------------------
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder
"\Multi-Access")
Note: "USB Audio device" filter provided by system does not support
mutil-Access.
2.Reset TI5150 when a new frequency is set
--------------------------------------------------------------------------------
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
--------------------------------------------------------------------------------
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
--------------------------------------------------------------------------------
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
--------------------------------------------------------------------------------
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
--------------------------------------------------------------------------------
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark
in THDTV 2.61
--------------------------------------------------------------------------------
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
--------------------------------------------------------------------------------
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
--------------------------------------------------------------------------------
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
--------------------------------------------------------------------------------
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
--------------------------------------------------------------------------------
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
--------------------------------------------------------------------------------
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1"
in INF file.
4.Firmware update
--------------------------------------------------------------------------------
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and
the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
--------------------------------------------------------------------------------
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
--------------------------------------------------------------------------------
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
--------------------------------------------------------------------------------
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
--------------------------------------------------------------------------------
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate"
bug fixed
--------------------------------------------------------------------------------
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate"
support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
--------------------------------------------------------------------------------
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
--------------------------------------------------------------------------------
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
--------------------------------------------------------------------------------
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
--------------------------------------------------------------------------------
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
--------------------------------------------------------------------------------
And here is the readme from the other file within the update ?
**************************************************************************************************
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE,
Windows ME , Windows 2000 and Windows XP
**************************************************************************************************
--------------------------------------------------------------------------------
INTRODUCTION
--------------------------------------------------------------------------------
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows
ME , Windows 2000
and Windows XP.
--------------------------------------------------------------------------------
CONTENTS OF THIS DOCUMENT
--------------------------------------------------------------------------------
1. Installation Instructions
2. Uninstallation Instructions
--------------------------------------------------------------------------------
1. Installation Instructions
--------------------------------------------------------------------------------
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart
your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB
Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn
off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your
computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB
Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot
the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your
computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB
Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot
the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0
Root
Hub". Please select "install the software automatically (Recommended)" and
then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot
the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your
computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB
Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0
Root
Hub". Please select "install the software automatically (Recommended)" and
then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then
follow
above steps to install driver again.
--------------------------------------------------------------------------------
2. Uninstallation Instructions
--------------------------------------------------------------------------------
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
--------------------------------------------------------------------------------
Change List:
--------------------------------------------------------------------------------
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0
hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0
Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner
from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the
SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when
system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if
system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from
standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or
scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from
standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0
hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is
disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0
devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP
composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge
on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0
and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some
system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device
plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after
different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices
existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO
ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT
MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS
SUPPOSED TO FIX .
