Intel Pro/1000 PT Server Adapter Problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi,

I have tried both Vista 32-bit and 64-bit with the PROSET 11.2 drivers, but
I always get "Limited Connection" problem and unable find anything on the
network. The connection is directly to a D-Link 8-port gigabit switch (have
tried with another switch: Planex SW-0208G, but same problem), where the
network consists of a few network printers and a linux router. Is there any
way to let me connect to the internet ?
 
try your routers first I have same problem It cause from the router not
being compatible with vista your network card should be Fine.
 
It seems that I am not even able to connect to anything locally (intranet),
so it does not seem to be anything related to the router. Is there anything
wrong with the Intel drivers?
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Intel Porset wireless Problem 1
can't install netcard driver of "Intel(R) PRO/1000 PF Server Adapt 5
VIA Networking Velocity Gigabit Ethernet Adapter problems after SP 1
Intel Pro/1000 gigabit adapter 4
VLANs - Can I safely connect an unmanaged switch to a managed switch? 4
Bluescreen that Windows thinks is related to the wireless card 1
USB adapter and parallel printer 2
NetGear GA311 GigaBit PCI Adapter 11

Back
Top