Installing DVR

[Guest]

Hi I'm installing an internal pioneer DVR-1810 but can't get my PC to read
the device, I was told that I need to add the slave drive/partition/Bios

Can anyone tell what I need to do, for the system to read the CD ROM and the
DVR?

 

[Guest]

What do you mean read the device, that makes no sense.
XP should automatically see the device and list it in windows explorer, it
should say dvd/rom drive.
what exactly are you doing to (read the device)?
Please list the step you are taking after physically installing the device

 

[Guest]

Check the jumper pins on the drive,set to master or slave,move the pin as
mfg recommends.The dvr doesnt need another drive on the same IDE cable,
also,what would you partition...

 

[Guest]

Perhaps I am not that computer Savvy but I installed the DVR on the secondary
slave, the secondary master has a CD-ROM attached to it, once installed the
DVR does not show up on the device manager as hardware, it show up if I
disconnect the CD-Rom and restart the PC then it shows device shows. I am not
doing something right after both devices are installed only one show up on
the device manager.

 

[Guest]

Will check the jumper pins, I am not sure why the device manager does not
show both devices the cd-rom on the master and the dvr on the secondary