Incoming connection

[Guest]

I have a tower running XP Pro and a laptop running XP Home. Both are
connected to the internet through a D-Link DI-604 router. The internet
connection is a 3 meg VDSL line. I have set up an incoming connection with a
US Robotics 56K modem, when away from home, I dial into the modem with the
laptop, and I can access the shared folders on the tower just fine, I can
also "see" my shared printer on the dial-up connection, but I can not access
my internet connection via dial-up. Is there any way to fix this problem?

 

[Robert L [MS-MVP]]

You may want to uncheck "Use default gateway on remote network".

Routing issues on VPN
Can't access the internal server when remote client establishes VPN Can't access
the Internet while using VPN Can't access the remote network after ...
www.chicagotech.net/routingissuesonvpn.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I have a tower running XP Pro and a laptop running XP Home. Both are
connected to the internet through a D-Link DI-604 router. The internet
connection is a 3 meg VDSL line. I have set up an incoming connection with a
US Robotics 56K modem, when away from home, I dial into the modem with the
laptop, and I can access the shared folders on the tower just fine, I can
also "see" my shared printer on the dial-up connection, but I can not access
my internet connection via dial-up. Is there any way to fix this problem?

 

[Guest]

This is very strange!! I unchecked the " use default ...." box and it didn't
help. So I put the check back. I was using the call back option on the
incoming connection, so I disabled this option and connected from the laptop
to the tower, all worked as it should, I could see my shares and use the
internet connection on the tower. Next I re-enabled the callback option and
called from the laptop to the tower, the tower called the laptop and now,
everyhting works, I can see my shares and connect to the internet. No changes
to anything from when it failed to when it worked, just disabling and
re-enabling callback. Any explanations ??