Inaccessible Boot Device

G

Guest

I have 2 machines:
Machine A is Unisys ES3020 with 1 Processor and PERC RAID controlle
This is running Windows 2

Machine B is Unisys ES3020 with 2 Processors and the same PERC RAID controlle

Simulating a recovery process, I performed a System State Backup on Machine A and restore onto MAchine B. After the restoration and rebooting, I have got the Inaccessible Boot Device STOP ERROR. What could have went wrong

Please help

Regards
Min Yau
 
P

Pegasus \(MVP\)

minyau said:
I have 2 machines: -
Machine A is Unisys ES3020 with 1 Processor and PERC RAID controller
This is running Windows 2K

Machine B is Unisys ES3020 with 2 Processors and the same PERC RAID controller

Simulating a recovery process, I performed a System State Backup on
Machine A and restore onto MAchine B. After the restoration and rebooting, I
have got the Inaccessible Boot Device STOP ERROR. What could have went
wrong?
Please help.

Regards,
Min Yau

Windows 2000 does not like to be restored onto different hardware.
 
G

Gerry Voras

You restored to a unit that requires a differend HAL. If you can get into
safe mode, you may be able to get into device manager and change the
processor type.

minyau said:
I have 2 machines: -
Machine A is Unisys ES3020 with 1 Processor and PERC RAID controller
This is running Windows 2K

Machine B is Unisys ES3020 with 2 Processors and the same PERC RAID controller

Simulating a recovery process, I performed a System State Backup on
Machine A and restore onto MAchine B. After the restoration and rebooting, I
have got the Inaccessible Boot Device STOP ERROR. What could have went
wrong?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top