In FP2002, ISP Server Publishing Problem

A

AA Smith

What might cause an ISP's server to stop publication and report that it
could not rename a .jpg file? I understand what the message says, but what
might it actually mean? I was simply publishing a new page, containing 4
..jpg images. After publishing 3 of the 4 images, (according to the progress
bar & text) the server discontinued publishing and reported it could not
rename one of the 4 .jpg files. All of those files had relatively short,
lower-case file names, like "ccstartpg1.jpg" for example.

In the first place, why would it rename the files? And what might prevent
the server from being able to do so?

I tried publishing several times, but always got the same result. I even
tried once with no firewall or virus protection active.

I shall greatly appreciate your help on this.
 
T

Thomas A. Rowe

1. The server could be out of space.
2. The permissions for your account are not set correctly or the extensions are corrupted.
3. Files are publish to a temporary space and then copied to the actual location in your web.

Ask your host to run check on the extensions for your account.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================
 
A

AA Smith

Thanks, Thomas!

It's more than likely the first problem you identified. Those images are
large. Originally each of the 4 images were half of a page of a
long-out-of-print newspaper. I had to scale them down by dragging handles
to get them reduced to a size that would work for a web page. The image
files average about 2mb each. I'm not sure if there's any way to reduce the
actual file size in bytes and still have any kind of clear image left.

Though, I'm certainly open to suggestions. Maybe I'll have to find an ISP
that's better capable of accommodating my needs.
 
?

=?Windows-1252?Q?Rob_Giordano_\=28Crash_Gordon=AE\

Scaling them down does not necessarily decrease the file size...especially in FP.
Download IrFanview (freebie) and use it to resize & optimize your images prior to Importing them into FP.

http://www.irfanview.net

uploading 2mb files may be part of the prob too.


| Thanks, Thomas!
|
| It's more than likely the first problem you identified. Those images are
| large. Originally each of the 4 images were half of a page of a
| long-out-of-print newspaper. I had to scale them down by dragging handles
| to get them reduced to a size that would work for a web page. The image
| files average about 2mb each. I'm not sure if there's any way to reduce the
| actual file size in bytes and still have any kind of clear image left.
|
| Though, I'm certainly open to suggestions. Maybe I'll have to find an ISP
| that's better capable of accommodating my needs.
| --
| With kindest regards,
|
| Dick Smith
|
| | > 1. The server could be out of space.
| > 2. The permissions for your account are not set correctly or the
| > extensions are corrupted.
| > 3. Files are publish to a temporary space and then copied to the actual
| > location in your web.
| >
| > Ask your host to run check on the extensions for your account.
| >
| > --
| > ==============================================
| > Thomas A. Rowe (Microsoft MVP - FrontPage)
| > ==============================================
| > If you feel your current issue is a results of installing
| > a Service Pack or security update, please contact
| > Microsoft Product Support Services:
| > http://support.microsoft.com
| > If the problem can be shown to have been caused by a
| > security update, then there is usually no charge for the call.
| > ==============================================
| >
| > | >> What might cause an ISP's server to stop publication and report that it
| >> could not rename a .jpg file? I understand what the message says, but
| >> what might it actually mean? I was simply publishing a new page,
| >> containing 4 .jpg images. After publishing 3 of the 4 images, (according
| >> to the progress bar & text) the server discontinued publishing and
| >> reported it could not rename one of the 4 .jpg files. All of those files
| >> had relatively short, lower-case file names, like "ccstartpg1.jpg" for
| >> example.
| >>
| >> In the first place, why would it rename the files? And what might
| >> prevent the server from being able to do so?
| >>
| >> I tried publishing several times, but always got the same result. I even
| >> tried once with no firewall or virus protection active.
| >>
| >> I shall greatly appreciate your help on this.
| >> --
| >> With kindest regards,
| >>
| >> Dick Smith
| >>
| >
| >
|
|
 
A

Andrew Murray

you could paste the image of the new paper articles into a word documen t,
then export the Word doc as PDF.
it might go someway to reducing the file size and still have a legible copy.
 
A

AA Smith

Hmmmm....... Very interesting. I'll give it the ol' college try.

Thanks, again, Andrew!
 
A

AA Smith

Thanks, Rob!

I'll most certainly download this and see how much it may optimize the
image.
--
With kindest regards,

Dick Smith
message Scaling them down does not necessarily decrease the file size...especially
in FP.
Download IrFanview (freebie) and use it to resize & optimize your images
prior to Importing them into FP.

http://www.irfanview.net

uploading 2mb files may be part of the prob too.


| Thanks, Thomas!
|
| It's more than likely the first problem you identified. Those images are
| large. Originally each of the 4 images were half of a page of a
| long-out-of-print newspaper. I had to scale them down by dragging handles
| to get them reduced to a size that would work for a web page. The image
| files average about 2mb each. I'm not sure if there's any way to reduce
the
| actual file size in bytes and still have any kind of clear image left.
|
| Though, I'm certainly open to suggestions. Maybe I'll have to find an ISP
| that's better capable of accommodating my needs.
| --
| With kindest regards,
|
| Dick Smith
|
| | > 1. The server could be out of space.
| > 2. The permissions for your account are not set correctly or the
| > extensions are corrupted.
| > 3. Files are publish to a temporary space and then copied to the actual
| > location in your web.
| >
| > Ask your host to run check on the extensions for your account.
| >
| > --
| > ==============================================
| > Thomas A. Rowe (Microsoft MVP - FrontPage)
| > ==============================================
| > If you feel your current issue is a results of installing
| > a Service Pack or security update, please contact
| > Microsoft Product Support Services:
| > http://support.microsoft.com
| > If the problem can be shown to have been caused by a
| > security update, then there is usually no charge for the call.
| > ==============================================
| >
| > | >> What might cause an ISP's server to stop publication and report that it
| >> could not rename a .jpg file? I understand what the message says, but
| >> what might it actually mean? I was simply publishing a new page,
| >> containing 4 .jpg images. After publishing 3 of the 4 images,
(according
| >> to the progress bar & text) the server discontinued publishing and
| >> reported it could not rename one of the 4 .jpg files. All of those
files
| >> had relatively short, lower-case file names, like "ccstartpg1.jpg" for
| >> example.
| >>
| >> In the first place, why would it rename the files? And what might
| >> prevent the server from being able to do so?
| >>
| >> I tried publishing several times, but always got the same result. I
even
| >> tried once with no firewall or virus protection active.
| >>
| >> I shall greatly appreciate your help on this.
| >> --
| >> With kindest regards,
| >>
| >> Dick Smith
| >>
| >
| >
|
|
 
A

AA Smith

Thanks a million, Rob!

IrFanview works great! It reduced a 2.x gigabytes file down to a much more
manageable 193kb. And, the reduced image looks terrific! That's
impressive! I can't thank you enough.
--
With kindest regards,

Dick Smith
message Scaling them down does not necessarily decrease the file size...especially
in FP.
Download IrFanview (freebie) and use it to resize & optimize your images
prior to Importing them into FP.

http://www.irfanview.net

uploading 2mb files may be part of the prob too.


| Thanks, Thomas!
|
| It's more than likely the first problem you identified. Those images are
| large. Originally each of the 4 images were half of a page of a
| long-out-of-print newspaper. I had to scale them down by dragging handles
| to get them reduced to a size that would work for a web page. The image
| files average about 2mb each. I'm not sure if there's any way to reduce
the
| actual file size in bytes and still have any kind of clear image left.
|
| Though, I'm certainly open to suggestions. Maybe I'll have to find an ISP
| that's better capable of accommodating my needs.
| --
| With kindest regards,
|
| Dick Smith
|
| | > 1. The server could be out of space.
| > 2. The permissions for your account are not set correctly or the
| > extensions are corrupted.
| > 3. Files are publish to a temporary space and then copied to the actual
| > location in your web.
| >
| > Ask your host to run check on the extensions for your account.
| >
| > --
| > ==============================================
| > Thomas A. Rowe (Microsoft MVP - FrontPage)
| > ==============================================
| > If you feel your current issue is a results of installing
| > a Service Pack or security update, please contact
| > Microsoft Product Support Services:
| > http://support.microsoft.com
| > If the problem can be shown to have been caused by a
| > security update, then there is usually no charge for the call.
| > ==============================================
| >
| > | >> What might cause an ISP's server to stop publication and report that it
| >> could not rename a .jpg file? I understand what the message says, but
| >> what might it actually mean? I was simply publishing a new page,
| >> containing 4 .jpg images. After publishing 3 of the 4 images,
(according
| >> to the progress bar & text) the server discontinued publishing and
| >> reported it could not rename one of the 4 .jpg files. All of those
files
| >> had relatively short, lower-case file names, like "ccstartpg1.jpg" for
| >> example.
| >>
| >> In the first place, why would it rename the files? And what might
| >> prevent the server from being able to do so?
| >>
| >> I tried publishing several times, but always got the same result. I
even
| >> tried once with no firewall or virus protection active.
| >>
| >> I shall greatly appreciate your help on this.
| >> --
| >> With kindest regards,
| >>
| >> Dick Smith
| >>
| >
| >
|
|
 
?

=?Windows-1252?Q?Rob_Giordano_\=28Crash_Gordon=AE\

You're welcome...and I bet you can optimize it down to 25k +/- and it still will look fine on the web.


| Thanks a million, Rob!
|
| IrFanview works great! It reduced a 2.x gigabytes file down to a much more
| manageable 193kb. And, the reduced image looks terrific! That's
| impressive! I can't thank you enough.
| --
| With kindest regards,
|
| Dick Smith
| message | Scaling them down does not necessarily decrease the file size...especially
| in FP.
| Download IrFanview (freebie) and use it to resize & optimize your images
| prior to Importing them into FP.
|
| http://www.irfanview.net
|
| uploading 2mb files may be part of the prob too.
|
|
| | | Thanks, Thomas!
| |
| | It's more than likely the first problem you identified. Those images are
| | large. Originally each of the 4 images were half of a page of a
| | long-out-of-print newspaper. I had to scale them down by dragging handles
| | to get them reduced to a size that would work for a web page. The image
| | files average about 2mb each. I'm not sure if there's any way to reduce
| the
| | actual file size in bytes and still have any kind of clear image left.
| |
| | Though, I'm certainly open to suggestions. Maybe I'll have to find an ISP
| | that's better capable of accommodating my needs.
| | --
| | With kindest regards,
| |
| | Dick Smith
| |
| | | | > 1. The server could be out of space.
| | > 2. The permissions for your account are not set correctly or the
| | > extensions are corrupted.
| | > 3. Files are publish to a temporary space and then copied to the actual
| | > location in your web.
| | >
| | > Ask your host to run check on the extensions for your account.
| | >
| | > --
| | > ==============================================
| | > Thomas A. Rowe (Microsoft MVP - FrontPage)
| | > ==============================================
| | > If you feel your current issue is a results of installing
| | > a Service Pack or security update, please contact
| | > Microsoft Product Support Services:
| | > http://support.microsoft.com
| | > If the problem can be shown to have been caused by a
| | > security update, then there is usually no charge for the call.
| | > ==============================================
| | >
| | > | | >> What might cause an ISP's server to stop publication and report that it
| | >> could not rename a .jpg file? I understand what the message says, but
| | >> what might it actually mean? I was simply publishing a new page,
| | >> containing 4 .jpg images. After publishing 3 of the 4 images,
| (according
| | >> to the progress bar & text) the server discontinued publishing and
| | >> reported it could not rename one of the 4 .jpg files. All of those
| files
| | >> had relatively short, lower-case file names, like "ccstartpg1.jpg" for
| | >> example.
| | >>
| | >> In the first place, why would it rename the files? And what might
| | >> prevent the server from being able to do so?
| | >>
| | >> I tried publishing several times, but always got the same result. I
| even
| | >> tried once with no firewall or virus protection active.
| | >>
| | >> I shall greatly appreciate your help on this.
| | >> --
| | >> With kindest regards,
| | >>
| | >> Dick Smith
| | >>
| | >
| | >
| |
| |
|
|
 
A

AA Smith

Hello, again, Andrew!

I've pasted the newspaper images into Word as you suggested. However I
don't know how to export them to a .pdf. I find no export option in Word
And the only Adobe software I have is the Acrobat Reader. So, I'd very much
appreciate a bit of clarification on that point.
 
T

Tom Pepper Willett

You would need a pdf writing program, such as Adobe Acrobat, installed.
Adobe will let you make one pdf online for free. Or, do an internet search
for free pdf, and there should be some free applications.
--
===
Tom "Pepper" Willett
Microsoft MVP - FrontPage
---
About FrontPage 2003:
http://office.microsoft.com/home/office.aspx?assetid=FX01085802
===
| Hello, again, Andrew!
|
| I've pasted the newspaper images into Word as you suggested. However I
| don't know how to export them to a .pdf. I find no export option in Word
| And the only Adobe software I have is the Acrobat Reader. So, I'd very
much
| appreciate a bit of clarification on that point.
| --
| With kindest regards,
|
| Dick Smith
|
|
|
| | > you could paste the image of the new paper articles into a word documen
t,
| > then export the Word doc as PDF.
| > it might go someway to reducing the file size and still have a legible
| > copy.
| >
| > | >> Thanks, Thomas!
| >>
| >> It's more than likely the first problem you identified. Those images
are
| >> large. Originally each of the 4 images were half of a page of a
| >> long-out-of-print newspaper. I had to scale them down by dragging
| >> handles to get them reduced to a size that would work for a web page.
| >> The image files average about 2mb each. I'm not sure if there's any
way
| >> to reduce the actual file size in bytes and still have any kind of
clear
| >> image left.
| >>
| >> Though, I'm certainly open to suggestions. Maybe I'll have to find an
| >> ISP that's better capable of accommodating my needs.
| >> --
| >> With kindest regards,
| >>
| >> Dick Smith
| >>
| >> | >>> 1. The server could be out of space.
| >>> 2. The permissions for your account are not set correctly or the
| >>> extensions are corrupted.
| >>> 3. Files are publish to a temporary space and then copied to the
actual
| >>> location in your web.
| >>>
| >>> Ask your host to run check on the extensions for your account.
| >>>
| >>> --
| >>> ==============================================
| >>> Thomas A. Rowe (Microsoft MVP - FrontPage)
| >>> ==============================================
| >>> If you feel your current issue is a results of installing
| >>> a Service Pack or security update, please contact
| >>> Microsoft Product Support Services:
| >>> http://support.microsoft.com
| >>> If the problem can be shown to have been caused by a
| >>> security update, then there is usually no charge for the call.
| >>> ==============================================
| >>>
| >>> | >>>> What might cause an ISP's server to stop publication and report that
it
| >>>> could not rename a .jpg file? I understand what the message says,
but
| >>>> what might it actually mean? I was simply publishing a new page,
| >>>> containing 4 .jpg images. After publishing 3 of the 4 images,
| >>>> (according to the progress bar & text) the server discontinued
| >>>> publishing and reported it could not rename one of the 4 .jpg files.
| >>>> All of those files had relatively short, lower-case file names, like
| >>>> "ccstartpg1.jpg" for example.
| >>>>
| >>>> In the first place, why would it rename the files? And what might
| >>>> prevent the server from being able to do so?
| >>>>
| >>>> I tried publishing several times, but always got the same result. I
| >>>> even tried once with no firewall or virus protection active.
| >>>>
| >>>> I shall greatly appreciate your help on this.
| >>>> --
| >>>> With kindest regards,
| >>>>
| >>>> Dick Smith
| >>>>
| >>>
| >>>
| >>
| >>
| >
| >
|
|
 
?

=?Windows-1252?Q?Rob_Giordano_\=28Crash_Gordon=AE\

The folks over in the ms pub ng recommend this one a lot:
http://www.primopdf.com/

I'm sure there are other free ones too.

AA: These guys will usually appear as Printers in your printer list...no exporting, you just print to the pdf creator.



| You would need a pdf writing program, such as Adobe Acrobat, installed.
| Adobe will let you make one pdf online for free. Or, do an internet search
| for free pdf, and there should be some free applications.
| --
| ===
| Tom "Pepper" Willett
| Microsoft MVP - FrontPage
| ---
| About FrontPage 2003:
| http://office.microsoft.com/home/office.aspx?assetid=FX01085802
| ===
| | | Hello, again, Andrew!
| |
| | I've pasted the newspaper images into Word as you suggested. However I
| | don't know how to export them to a .pdf. I find no export option in Word
| | And the only Adobe software I have is the Acrobat Reader. So, I'd very
| much
| | appreciate a bit of clarification on that point.
| | --
| | With kindest regards,
| |
| | Dick Smith
| |
| |
| |
| | | | > you could paste the image of the new paper articles into a word documen
| t,
| | > then export the Word doc as PDF.
| | > it might go someway to reducing the file size and still have a legible
| | > copy.
| | >
| | > | | >> Thanks, Thomas!
| | >>
| | >> It's more than likely the first problem you identified. Those images
| are
| | >> large. Originally each of the 4 images were half of a page of a
| | >> long-out-of-print newspaper. I had to scale them down by dragging
| | >> handles to get them reduced to a size that would work for a web page.
| | >> The image files average about 2mb each. I'm not sure if there's any
| way
| | >> to reduce the actual file size in bytes and still have any kind of
| clear
| | >> image left.
| | >>
| | >> Though, I'm certainly open to suggestions. Maybe I'll have to find an
| | >> ISP that's better capable of accommodating my needs.
| | >> --
| | >> With kindest regards,
| | >>
| | >> Dick Smith
| | >>
| | >> | | >>> 1. The server could be out of space.
| | >>> 2. The permissions for your account are not set correctly or the
| | >>> extensions are corrupted.
| | >>> 3. Files are publish to a temporary space and then copied to the
| actual
| | >>> location in your web.
| | >>>
| | >>> Ask your host to run check on the extensions for your account.
| | >>>
| | >>> --
| | >>> ==============================================
| | >>> Thomas A. Rowe (Microsoft MVP - FrontPage)
| | >>> ==============================================
| | >>> If you feel your current issue is a results of installing
| | >>> a Service Pack or security update, please contact
| | >>> Microsoft Product Support Services:
| | >>> http://support.microsoft.com
| | >>> If the problem can be shown to have been caused by a
| | >>> security update, then there is usually no charge for the call.
| | >>> ==============================================
| | >>>
| | >>> | | >>>> What might cause an ISP's server to stop publication and report that
| it
| | >>>> could not rename a .jpg file? I understand what the message says,
| but
| | >>>> what might it actually mean? I was simply publishing a new page,
| | >>>> containing 4 .jpg images. After publishing 3 of the 4 images,
| | >>>> (according to the progress bar & text) the server discontinued
| | >>>> publishing and reported it could not rename one of the 4 .jpg files.
| | >>>> All of those files had relatively short, lower-case file names, like
| | >>>> "ccstartpg1.jpg" for example.
| | >>>>
| | >>>> In the first place, why would it rename the files? And what might
| | >>>> prevent the server from being able to do so?
| | >>>>
| | >>>> I tried publishing several times, but always got the same result. I
| | >>>> even tried once with no firewall or virus protection active.
| | >>>>
| | >>>> I shall greatly appreciate your help on this.
| | >>>> --
| | >>>> With kindest regards,
| | >>>>
| | >>>> Dick Smith
| | >>>>
| | >>>
| | >>>
| | >>
| | >>
| | >
| | >
| |
| |
|
|
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top