IMPORTANT! Those with storage drives(ie.CDRW) reading as SCSI and not recording!

D

DCSloyer

Please remove the nForce chipset driver (go to control
panel -->Add Or Remove Program ), reboot system and
install chipset driver again. When you install the
chipset driver, you may see "SW driver...", please
skip it and don't install it. I got this solution from
the Chaintech support address and it cleared up my
problem in about 5mins. Just for the record, I spent
countless hours and 3 newsgroup posts trying to fix this.
TRUST ME, IT WORKS GREAT!

Tschusse,
Don
 
S

Steve Sanders

Dear Don

Could my problem be the same? I have a SM_308B Samsung
Combo Drive. It reads fine, but when trying to record on
RW or R, the drive does not recognise the disk at all. I
am running XP home and have tried an OEM SW and get an
error message Device Error 1022.

I've tried your fix but have no nforce chipset driver in
the Programme list. Any advice welcome.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Audio Recording Control Issue In Realtek High Definition Audio 1
Speedtouch USB broadband modem & VIA Sis 1
USB device not recognized (Canyon flash drive) 2
RAID 0 configuration on Gigabyte GA-8I915P Duo Pro to run Win XP. 8
Dell & Windows XP Pro SP1 & Adaptec ATA RAID 1200A Install Instructions 0
DMA enabled but NO UDMA access for DVD burner 9
XP Clean Install on SCSI drive taking > 12 hours 3
External USB harddisk problem is driving me crazy 18

Top