IDE Drive showing on RAID

L

Lagartija

Using a P4PE. I tried hooking up a 2nd drive (IDE) to the secondary
master. System wouldn't see it and after several jumper config I gave
up.

Problem is now - My IDE drive is not detected, but shows up as the
RAID drive and the RAID drive is not showing anywhere. This is in the
BIOS, so Windows XP shows the same thing.

I've checked the cabling, all seems correct.

Anyone seen this before ?

Appreciate some help, thank you.
 
T

timmy

I have that board, but no raid on it. What chip is on your's ?
Are your bios settings correct ?

Set to auto detect / enhanced mode etc...


ñíñjà¤têç

-----END-PGP-SIGNATURE-----
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

K8N-E SATA / IDE / Floppy Device Conflict 1
P4P800-E Deluxe...which IDE connectors can I use 1
P4C800E-Deluxe: Setting up IDE (non-Raid) on Raid Ultra133 connector?? 2
A8V Delux - Promise IDE 2
what did i do wrong in setup 5
K8V SE - Cannot use IDE RAID. 1
P4PE - Double RAIDed 7
PATA RAID on a K8V SE Deluxe? 1

Top