i have some hardware problem

  • Thread starter Thread starter naresh
  • Start date Start date
N

naresh

i have a p4 system with mercury motherboard. but when i power on it
displaying different errors(not the same). when i try to move the RAM
in slot in very rare case it is working. it is happening in the two
RAM slots. but the RAM is properly working when it is attached to
other system. what would be the problem. is it possible to change the
RAM slot of mother board if the slots were damaged.
 
naresh said:
i have a p4 system with mercury motherboard. but when i power on it
displaying different errors(not the same). when i try to move the RAM
in slot in very rare case it is working. it is happening in the two
RAM slots. but the RAM is properly working when it is attached to
other system. what would be the problem. is it possible to change the
RAM slot of mother board if the slots were damaged.
Click to expand...


the RAM slots sure could be bad.

Get a bright light and a magnifying glass and have a good look.

It might be dust in there but could be worse.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

RAM Problem 2
ASRock Fatal1ty X99 Professional Gaming i7 0
Is PCIe 1.0 slot bottlenecking PCIe 3.0 HD 7850? 1
ASUS's Approved Ram List? 15
suggest me a graphic card 4
problem to use DDR insted of SD RAM 3
Problems installing RAM 1
How much RAM can I put in this free slot? 6

Back
Top