I currently have a multiple boot, Windows 2000 and ME, how can I remove ME?

  • Thread starter Thread starter Paween
  • Start date Start date
P

Paween

I used to run on ME until some operating files were
corrupted. Trying to fix the problem, things got worse and
I ended up having to install Windows 2000. I currently
have a multiple boot between the two and the ME is still
not running properly. I want to remove the ME to free up
some space. Any suggestions?
 
You will need to determine your install paths.

Typically the boot.ini file will list this information. By default Windows
2000 installs into C:\WINNT directory. ME installs into the C:\WINDOWS
directory (if memory serves).

If you are on separate partitions then you need to determine which one is
safe to delete. If you are on the same partition, you are safe to delete the
directory that ME is installed to.

Just make SURE that you know which directory it actually is. Then I would
either edit the BOOT.INI file to remove the reference to ME or just set the
Windows 2000 boot up to be the default with no delay to start up.

I used to run on ME until some operating files were
corrupted. Trying to fix the problem, things got worse and
I ended up having to install Windows 2000. I currently
have a multiple boot between the two and the ME is still
not running properly. I want to remove the ME to free up
some space. Any suggestions?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Computer Nooby , advice needed. 1
winload.efi error warning on W7 boot up. 4
An upsetting NEW motherboard issue 28
I have a challenge for you 5
Windows 10 One of my previous builds is experiencing random, multiple BSODs 9
Panasonic cf-29 boot from CD 0
A required device isn't connected or can't be accessed. Error code:0xc0000225 5
Dual Boot winME and 2000 3

Back
Top