HP Laser Jet 1012 print setup

[Molin Vardo]

Suddenly, my LaserJet 1012 will only print in WordPerfect 12 in a size
4.13" x 5.85". No matter how I reset the properties in WP, each
document prints in the same size on my 8.5" x 11" paper. Some weeks
ago, I did reset my printer through WP to print a document in this
"small" (A6) format for some special note paper that I was using.
Evidently WP cannot be reset back to it's original 8.5 x 11 format (what
I thought was the "default" format!)

The printer works fine with Word printings, or Notepad printings or even
directly from my scanner - so the problem seems to reside entirely with
Word Perfect12. Anyone know exactly WHAT settings I could have made
within WP12 that refuse to be changed? Would reinstall of WordPerfect
Office 12 (and it's updates, of course) take care of the matter, or
would just a reinstall of the update do it. I hate to start from
scratch and have to readjust settings manually after all these years of
satisfaction with WP from 7 and 8 through 10.

I also use an HPDeskjet 895Cse(color) printer and WP12 performs
perfectly on THAT printer. However, for economy and not to need to
change from BW to Color each printing, I prefer to do my general text
printing on the LaserJet. Up to just recently, the LaserJet has served
me fine (and still does with any program but WordPerfect 12.) Thanks
for any assistance.

Molin Vardo

 

[ggull]

Suddenly, my LaserJet 1012 will only print in WordPerfect 12 in a size
4.13" x 5.85". No matter how I reset the properties in WP, each

There seem to be a number of ng's devoted to wordperfect, including one to
wp12.
You might have luck with those.
A better subject line would help also, since this problem is specific to
Wordperfect and probably nothing to do with 1012 setup per se.