How would I remove SuSE Linux on a dual boot system with xp

[cheetahman]

Where can I find a tutorial to do it

Once you boot from the CD follow the instructions until you get to the
part where you see all the partitions on your hard drive.

Also I am refering to this guide

http://www.linuxforums.org/tutorials/1/tutorial-20532.html


I am going to completely uninstall SuSE Linux the reinstall is a dual
boot as a way of increaseing space

Also I found these too would they help but they look oudated and when
I remove Linux won’t I have a huge space of blank space which I could
merge into XP

http://portal.suse.com/sdb/en/1999/03/tg_deinstall.html
http://portal.suse.com/sdb/en/2002/09/fhas...stall_grub.html

Also I don’t have partition magic

Its a dual boot with Xp and Xp is the primary install with SuSE as
second in one hardrive

 

[Sparda]

Where can I find a tutorial to do it

Once you boot from the CD follow the instructions until you
get to the part where you see all the partitions on your hard
drive.

Also I am refering to this guide

http://www.linuxforums.org/tutorials/1/tutorial-20532.html


I am going to completely uninstall SuSE Linux the reinstall is
a dual boot as a way of increaseing space

Also I found these too would they help but they look oudated
and when I remove Linux won't I have a huge space of blank
space which I could merge into XP

http://portal.suse.com/sdb/en/1999/03/tg_deinstall.html
http://portal.suse.com/sdb/en/2002/09/fhas...stall_grub.html

Also I don't have partition magic

Its a dual boot with Xp and Xp is the primary install with
SuSE as second in one hardrive

you would have to basicly totaly destroy your partion table, and the
nrewrite it so that the NTFS partion fills the HD, in doing this you
will lose all data on the drive. Althought it isnt hard, just put XP
boot disk in, when you get to the partion seclection menu, delete all
partions on the HD, and make a new one that fills the HD, but as i
said, doing this will erase all data on the HD. If this is what you
mean, then OK. But your post is a bit confusing, please clarifie.

QUESTION!: Why would you want to remove SuSE, it’s far better then
windows, the only problem i have with suse is that ATI dont make
propper Linux drivers for my graphics card (9800) and that CUPS (wiht
out upgrade) dosnt support my printer.

 

[cheetahman]

you would have to basicly totaly destroy your partion table,
and the nrewrite it so that the NTFS partion fills the HD, in
doing this you will lose all data on the drive. Althought it
isnt hard, just put XP boot disk in, when you get to the
partion seclection menu, delete all partions on the HD, and
make a new one that fills the HD, but as i said, doing this
will erase all data on the HD. If this is what you mean, then
OK. But your post is a bit confusing, please clarifie.

QUESTION!: Why would you want to remove SuSE, it's far better
then windows, the only problem i have with suse is that ATI
dont make propper Linux drivers for my graphics card (9800)
and that CUPS (wiht out upgrade) dosnt support my printer.

Would this be it

1.Go into windows administrative tools, delete all non-ntfs partitions


2.Run fixmbr either from windows or windows repair console to
overwrite GRUB

Also could you describe step 2 more indepth because I don’t understand
that

I don’t want to remove XP and I am dual booting with Windows Xp Home
and SuSE Linux 9.3 and I want to reinstall suse with more space since
partitioning doesn’t work

 

[Sparda]

you would have to basicly totaly destroy your partion table,
and the nrewrite it so that the NTFS partion fills the HD, in
doing this you will lose all data on the drive. Althought it
isnt hard, just put XP boot disk in, when you get to the
partion seclection menu, delete all partions on the HD, and
make a new one that fills the HD, but as i said, doing this
will erase all data on the HD. If this is what you mean, then
OK. But your post is a bit confusing, please clarifie.

QUESTION!: Why would you want to remove SuSE, it's far better
then windows, the only problem i have with suse is that ATI
dont make propper Linux drivers for my graphics card (9800)
and that CUPS (wiht out upgrade) dosnt support my printer.

Upon reevaluation of your prediciment, i think what you are wanting to
to is dule boot XP and SuSE cohesivly. What you need to do is install
XP FIRST!!!, thats very important, and use the partion menu in XP to
set up the partioning you want. Then, once XP is instaled and running
happily, begin instalation of SuSE, SuSE (been a most excelent
product) should automaticly detect that windows is installed and
automaticly configure dule booting for you, so every time you turn
your computer on, a nice colour full menu apears asking whcih OS you
want to use. By default it will boot SuSE after 8 seconds, so you may
wish to look for the boot manager config dure in instalation and set
windows to default IF YOU WANT. Also, if YaST gets it right, you
should be able to access your windows partion from SuSE, but READ
ONLY, in other operating systems (such as FreeBSD) reading NTFS
partions is extremly experemental, since microsft dont like to help
open source developers work cohesivly with windows. In SuSE reading
NTFS partions is quite safe, but you CANOT write. Not even if you are
SU’ed.

 

[Sparda]

Upon reevaluation of your prediciment, i think what you are
wanting to to is dule boot XP and SuSE cohesivly. What you
need to do is install XP FIRST!!!, thats very important, and
use the partion menu in XP to set up the partioning you want.
Then, once XP is instaled and running happily, begin
instalation of SuSE, SuSE (been a most excelent product)
should automaticly detect that windows is installed and
automaticly configure dule booting for you, so every time you
turn your computer on, a nice colour full menu apears asking
whcih OS you want to use. By default it will boot SuSE after 8
seconds, so you may wish to look for the boot manager config
dure in instalation and set windows to default IF YOU WANT.
Also, if YaST gets it right, you should be able to access your
windows partion from SuSE, but READ ONLY, in other operating
systems (such as FreeBSD) reading NTFS partions is extremly
experemental, since microsft dont like to help open source
developers work cohesivly with windows. In SuSE reading NTFS
partions is quite safe, but you CANOT write. Not even if you
are SU'ed.

Ye, if you are going to eedit your partion tabel with out using
partion magic (whcih in my personl opinoion is anoying and crap) then
you are going to lose all data on the drive. for this you WILL have to
reinstall BOTH OS’s. My Current standing is that i have an 80GB HD,
whcih i have partiond so that it has 38(ish)GB X 2 partions, one is
NTFS and otehr is RASIER (for SuSE) and 1GB for SWAP (SuSE vertual
memory) which works very well, plenty inof space for SuSE and windows

 

[Sparda]

Ye, if you are going to eedit your partion tabel with out
using partion magic (whcih in my personl opinoion is anoying
and crap) then you are going to lose all data on the drive.
for this you WILL have to reinstall BOTH OS's. My Current
standing is that i have an 80GB HD, whcih i have partiond so
that it has 38(ish)GB X 2 partions, one is NTFS and otehr is
RASIER (for SuSE) and 1GB for SWAP (SuSE vertual memory) which
works very well, plenty inof space for SuSE and windows

Also, when repartioning dure in windows setup, only make 1 partion,
becasue then YaST will automaticly see what free space there is, and
use it.

 

[cheetahman]

Upon reevaluation of your prediciment, i think what you are wanting to
to is dule boot XP and SuSE cohesivly. What you need to do is install
XP FIRST!!!, thats very important, and use the partion menu in XP to
set up the partioning you want. Then, once XP is instaled and running
happily, begin instalation of SuSE, SuSE (been a most excelent
product) should automaticly detect that windows is installed and
automaticly configure dule booting for you, so every time you turn
your computer on, a nice colour full menu apears asking whcih OS you
want to use. By default it will boot SuSE after 8 seconds, so you may
wish to look for the boot manager config dure in instalation and set
windows to default IF YOU WANT. Also, if YaST gets it right, you
should be able to access your windows partion from SuSE, but READ
ONLY, in other operating systems (such as FreeBSD) reading NTFS
partions is extremly experemental, since microsft dont like to help
open source developers work cohesivly with windows. In SuSE reading
NTFS partions is quite safe, but you CANOT write. Not even if you are
SU’ed.

Its currently dual booting

 

[Sparda]

[quote:61247ff32c="Sparda"]Upon reevaluation of your
prediciment, i think what you are wanting to to is dule boot
XP and SuSE cohesivly. What you need to do is install XP
FIRST!!!, thats very important, and use the partion menu in XP
to set up the partioning you want. Then, once XP is instaled
and running happily, begin instalation of SuSE, SuSE (been a
most excelent product) should automaticly detect that windows
is installed and automaticly configure dule booting for you,
so every time you turn your computer on, a nice colour full
menu apears asking whcih OS you want to use. By default it
will boot SuSE after 8 seconds, so you may wish to look for
the boot manager config dure in instalation and set windows to
default IF YOU WANT. Also, if YaST gets it right, you should
be able to access your windows partion from SuSE, but READ
ONLY, in other operating systems (such as FreeBSD) reading
NTFS partions is extremly experemental, since microsft dont
like to help open source developers work cohesivly with
windows. In SuSE reading NTFS partions is quite safe, but you
CANOT write. Not even if you are SU'ed.[/quote:61247ff32c]

Its currently dual booting

So you totaly want to remove SuSE?

 

[cheetahman]

So you totaly want to remove SuSE?

Yes then reinstall to increase space

 

[Sparda]

Yes then reinstall to increase space

So you still want it to dule boot?

 

[cheetahman]

So you still want it to dule boot?

Yes

 

[Sparda]

Then you need to do this

Upon reevaluation of your prediciment, i think what you are wanting to
to is dule boot XP and SuSE cohesivly. What you need to do is install
XP FIRST!!!, thats very important, and use the partion menu in XP to
set up the partioning you want. Then, once XP is instaled and running
happily, begin instalation of SuSE, SuSE (been a most excelent
product) should automaticly detect that windows is installed and
automaticly configure dule booting for you, so every time you turn
your computer on, a nice colour full menu apears asking whcih OS you
want to use. By default it will boot SuSE after 8 seconds, so you may
wish to look for the boot manager config dure in instalation and set
windows to default IF YOU WANT. Also, if YaST gets it right, you
should be able to access your windows partion from SuSE, but READ
ONLY, in other operating systems (such as FreeBSD) reading NTFS
partions is extremly experemental, since microsft dont like to help
open source developers work cohesivly with windows. In SuSE reading
NTFS partions is quite safe, but you CANOT write. Not even if you are
SU’ed.

Remember that once you have delted all partions on that hard drive,
only make 1 using the windows setup partionare.

 

[cheetahman]

Then you need to do this
Remember that once you have delted all partions on that hard drive,
only make 1 using the windows setup partionare.

What do you mean by this