how can I remove the Internet Gateway connection ?

  • Thread starter Thread starter Gabi
  • Start date Start date
G

Gabi

I have upgraded a window 2000 to XP, with an http server.
This machine connects thru a router to the internet.

However I can't access the http server from outside my
LAN (i.e. from the internet), while it works perfectly ok
inside my home LAN.

I noticed that in the Netwrok Connection folder that my
LAN connections is not connected to the router directly
but thru an "Internet Gateway" I have no idea from where
this comes, I assume this is the problem for my http
server. Any ideas how to delete it ?

Thanks
Gabi (e-mail address removed)
 
you may need open the port 80 for web access.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
If you have administrator rights, you should be able to
delete any of the network connections. You can then use
the Wizard to re-create a proper connection.

While right-clicking on a connection shows the 'delete'
option grayed out, you can highlight the connection and
hit the delete key, and the system should prompt you if
you are sure you want to delete the connection.
Confirm 'yes' and it should be gone.

Hope this helps.

Thanks, Jack
 
The Internet Gateway icon represents your router and is most likely not your
problem. See the above post about opening port 80.
 
Thanks for the suggestions, but the Internet Gateway (IG)
is not the router, I'm pretty sure, it has no details of
a machine. Moreover I have another XP in the LAN and it
doesn't show the router or this IG.

Also what do you mean enable port 80 ? where ?

When I try to add a service to the IG I get an error, and
it doesn;t add it.

Gabi.
-----Original Message-----
The Internet Gateway icon represents your router and is most likely not your
problem. See the above post about opening port 80.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


I have upgraded a window 2000 to XP, with an http server.
This machine connects thru a router to the internet.

However I can't access the http server from outside my
LAN (i.e. from the internet), while it works perfectly ok
inside my home LAN.

I noticed that in the Netwrok Connection folder that my
LAN connections is not connected to the router directly
but thru an "Internet Gateway" I have no idea from where
this comes, I assume this is the problem for my http
server. Any ideas how to delete it ?

Thanks
Gabi (e-mail address removed)


.
 
where od you mean to enable port 80 ? I tried to add port
80 to the internet gateway but i got an error.
I have no firewall and also the web is accessable form
inside my home LAN.

Gabi.
 
I do have admin right, and I tried to hit the Del key but
I get an error message and it doesn't works.

Gabi.
 
I have a similar situation. I have three PCs running off
a D-Link Router. 2 of them have the Internet Gateway in
their Network Connection list, but one doesn't. yet they
all seem to run 100% fine. So why do two of them have it
but the other one not??
The two that have it have constant LAN traffic flowing to
that Internet Gateway, at about 2.8KBs. The other PC is
dead quiet when not being used. Which makes me wonder
WHAT created the two with the Internet Gateways!!??
-----Original Message-----
The Internet Gateway icon represents your router and is most likely not your
problem. See the above post about opening port 80.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


I have upgraded a window 2000 to XP, with an http server.
This machine connects thru a router to the internet.

However I can't access the http server from outside my
LAN (i.e. from the internet), while it works perfectly ok
inside my home LAN.

I noticed that in the Netwrok Connection folder that my
LAN connections is not connected to the router directly
but thru an "Internet Gateway" I have no idea from where
this comes, I assume this is the problem for my http
server. Any ideas how to delete it ?

Thanks
Gabi (e-mail address removed)


.
 
I'm pretty confident that the IG is representing your router. Probably the
one XP machine that doesn't show the IG is running a firewall.

The IG would be the right place to add the port 80 mapping but you say it's
not working.

Most routers offer a native interface to add port mappings. Have a look at
the documentation for your router.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


Thanks for the suggestions, but the Internet Gateway (IG)
is not the router, I'm pretty sure, it has no details of
a machine. Moreover I have another XP in the LAN and it
doesn't show the router or this IG.

Also what do you mean enable port 80 ? where ?

When I try to add a service to the IG I get an error, and
it doesn;t add it.

Gabi.
-----Original Message-----
The Internet Gateway icon represents your router and is most likely not your
problem. See the above post about opening port 80.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


I have upgraded a window 2000 to XP, with an http server.
This machine connects thru a router to the internet.

However I can't access the http server from outside my
LAN (i.e. from the internet), while it works perfectly ok
inside my home LAN.

I noticed that in the Netwrok Connection folder that my
LAN connections is not connected to the router directly
but thru an "Internet Gateway" I have no idea from where
this comes, I assume this is the problem for my http
server. Any ideas how to delete it ?

Thanks
Gabi (e-mail address removed)


.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top