Help: Disk is not accessable

[Guest]

1. Maxtor 40Gb - partitioned into 2 drives
2. Maxtor 40Gb - partitioned into 2 drives
These two hard drives are connected to the on board ATA133 RAID connectors,
and was created an Array for Performance -> RAID 0 Stripe.
I was previously running Windows XP Professional and was able to read and
write all 4 partitions without any problem. However, Since I reinsalled the
XP Professional due to some other problems, one of the partition has become
inaccessible. When going into the Disk properties, its file system shows RAW.
and when going into the Disk Management, it shows up as Healthy Basic
Partition with an NTFS File System.

I want to be able to access the data on the drive, is there any way I can
fix this?

Thank you.

 

[Ben]

1. Maxtor 40Gb - partitioned into 2 drives
2. Maxtor 40Gb - partitioned into 2 drives
These two hard drives are connected to the on board ATA133 RAID connectors,
and was created an Array for Performance -> RAID 0 Stripe.
I was previously running Windows XP Professional and was able to read and
write all 4 partitions without any problem. However, Since I reinsalled the
XP Professional due to some other problems, one of the partition has become
inaccessible. When going into the Disk properties, its file system shows RAW.
and when going into the Disk Management, it shows up as Healthy Basic
Partition with an NTFS File System.

I want to be able to access the data on the drive, is there any way I can
fix this?

Thank you.

Your computer is really cool.