hdd, from one PC to another?

T

Talal Itani

Hello,

Is it possible to take a hard disk drive from a PC, and install it in
another PC? I currently have a P4 XP computer, and I need and upgrade. I
have so much software installed on my hdd. I thought, I can make a copy of
my hdd, and install the copy in the new PC. This way, I do not have to
re-install XP, and I do not have to reinstall my applications and my data.
Is that possible? Is it a bad idea? Thanks.

T.I.
 
N

Newbie Coder

Talal,

Do you have the licence? XP will pick up on the different hardware & say it isn't
activated. Plus, you need drivers for the other hardware
 
B

Bruce Chambers

Talal said:
Hello,

Is it possible to take a hard disk drive from a PC, and install it in
another PC? I currently have a P4 XP computer, and I need and upgrade. I
have so much software installed on my hdd. I thought, I can make a copy of
my hdd, and install the copy in the new PC. This way, I do not have to
re-install XP, and I do not have to reinstall my applications and my data.
Is that possible? Is it a bad idea? Thanks.

T.I.


It's possible, under the correct circumstances.

Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore are
*not* transferable to a new motherboard - check yours before starting),
unless the new motherboard is virtually identical (same chipset, same
IDE controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.



--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot
 
P

philo

Talal Itani said:
Hello,

Is it possible to take a hard disk drive from a PC, and install it in
another PC? I currently have a P4 XP computer, and I need and upgrade. I
have so much software installed on my hdd. I thought, I can make a copy of
my hdd, and install the copy in the new PC. This way, I do not have to
re-install XP, and I do not have to reinstall my applications and my data.
Is that possible? Is it a bad idea? Thanks.

T.I.

Most of the time a repair installtion is needed
 
K

Ken Blake, MVP

Hello,

Is it possible to take a hard disk drive from a PC, and install it in
another PC? I currently have a P4 XP computer, and I need and upgrade. I
have so much software installed on my hdd. I thought, I can make a copy of
my hdd, and install the copy in the new PC. This way, I do not have to
re-install XP, and I do not have to reinstall my applications and my data.
Is that possible? Is it a bad idea? Thanks.


Yes, it's possible. But a couple of points:

1. If your copy of Windows is an OEM copy, its license restricts it
permanently to the first computer its installed on. Transferring to
another computer is a license violation.

2. If its a retail computer, there's no licensing issue as long as you
uninstall it from the old computer.

3. The old hard drive will almost certainly not just work in the new
computer, because so much hardware will be different. Normally, a
Repair installation, and then reactivation, is all you need to do.
It's a rare occurrence, but occasionally the differences between the
two motherboards are severe enough that a repair installation doesn't
work, and a complete clean installation is required.
 
G

Guest

I'd Like to do the same thing. I bought an OEM version of XP Pro. A friend
Helped me install it. So this means, I'll Have to buy a retail version and do
a fresh install on a new hard, then I'm left with a paperweight for an old
hard drive?
 
R

Richard in AZ

No, same motherboard, new harddrive, re-install is okay. You might have to activate by phone, but
explain that you just have a new harddrive and you will get the new activation.
 
P

peter

a couple of things can happen........after the repair install the activation
can work just fine...or it will fail and you will need to phone MS for a
reactivation.
Since you are the system builder you do have the right to reinstall OEM XP
if the old mobo broke and you replaced it.
peter
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top