Have installed New Power Supply and dont stop when stop Win XP hom

[Guest]

Hi
I have installed a new Power Supply ( Antec SmartPower 2.0 400W ) and all go
well except that when i close Win XP the power supply still continue to run (
CPU and Video card to ) ???
help.

 

[Guest]

You must have something connected wrong,a computer that auto restarts,
or continues to run,is most always a hardware problem.Chk all
connections,does
the power button work (off/on) in front panel...

 

[Guest]

Thx for feedback,

The PC do not restart... The Win XP closed when ask for, but Power supply ,
cpu fan and Video card still continue to work...

Yes the front on/off button is operational and if i push it's restart Win XP.

Tomorow i will unplug and plug back all connector to try... but all
pereferical ( CD-rom etc ... ) work fine. ...........
If somebody have expirience that please leave fedback.. thx.
gcpilote

 

[Avatar]

Response below:

Thx for feedback,

The PC do not restart... The Win XP closed when ask for, but Power supply
,
cpu fan and Video card still continue to work...

Yes the front on/off button is operational and if i push it's restart Win
XP.

Tomorow i will unplug and plug back all connector to try... but all
pereferical ( CD-rom etc ... ) work fine. ...........
If somebody have expirience that please leave fedback.. thx.
gcpilote

Sounds like your system is actually going into standby instead of shutting
down. This is when Windows appears to have shut down but the CPU fan as well
as the power supply keeps running. But a press of the power switch will
"bring it back to life".

How do you shut down? Check the box that comes up after you click on the
Start button and select Shut Down. Make sure the selection is set to Shut
Down and not anything else under "What do you want the computer to do?"

HTH

Avatar

 

[Guest]

Thx ,
When Click START 3 options ( hybernate , close , restart ) are available
and i always click CLOSE..... ?? ans YES it's look like he hybernate..
others comments ???