Hangs after First (1st) Boot...?

B

Ben

Am trying to install Vista Business to my laptop:
Dell Inspiron 8200
1 gig RAM
100 GB hard drive
ATI Radeon Mobility 9000 video card w/64 megs RAM

The upgrade advisor tells me everything should work, but that I won't be
able to run Aero.

Doing a clean install, the first part completes -- the system reboots after
'Installing Updates' -- after the reboot, 'Completing Installation' runs for
a minute or so, then the system hangs. Keyboard is locked, hard drive
activity stops and the only way out of it is to hold the power button until
the device shuts off. Powering back on brings up an error that the
installation was terminated and needs to be started over. Have tried about
10 times so far, same thing. Reading through the posts here I found
reference to removing the DVD before the reboot, which I tried but this
didn't help.

Microsoft support says to contact Dell, Dell support says to contact
Microsoft :( Has anyone run into this? From what I've been able to find in
this newsgroup, the video drivers are being installed after the first reboot
(I think)...? Am at a loss as to what, if anything, to try next -- any help
would be >>>much<<< appreciated!!!! Thanks!!!!
 
G

Guest

I have the exact same problem. I am running a Toshiba Satellite M45-S265. I
am a computer technician by trade and have been in IT for over a decade. I
own my own business and support Vista on a daily basis. And here I go to
install it on my own and now I am at a loss.

The upgrade adviser said I wouldn't be able to run Aero and everything else
was good.

Installing it, it gets to the first reboot and hangs while the little
loading bar zips by twice.

I need to get her installed and then disable that Aero BS.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top