Hal.dll file is corrupted when installing XP on Sata Raid

  • Thread starter Thread starter DELTAsnake
  • Start date Start date
D

DELTAsnake

I have a raid 0 setup as my boot partition. After the
format of the hard drives and copying of setup files the
system reboots as normal. But after the post screen I
recive an error saying that the hal.dll file is
corrupted. I have tryed XP Home, Pro and a friends copy
of Corperate and all give the same error. My motherboard
has two Raid controlers, I've tryed both and I get the
same error on both.

Motherboard: GA-8KNXP Rev2
Chipset: Intel 875p
Raid controlers: Raid controler built into 875p and Sil
Image 3112
Hard drives: 2x Seagate Barracuda 80gb SATA.

Thank you for any help.
 
You need to install xp cd,boot to cd,as it loads you'll see,prees F6 to install
raid or scsi drivers,then have drivers on a floppy to install.You'll also need to
configure in BIOS.TechNet at microsoft has great info on Raid 0 set-up,try search.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Raid Controller and installing XP pro on raid 0 help 2
System does not boot when connecting hard drive to SATA card vs on-boardSATA controller 5
More Raid 0 SATA problems 1
Can't install xp on my sata drive 6
can't install xp on my sata drive6 1
Windows XP Pro Install 1
A RAID tale and other encounters 22
Windows XP SP2 Fails to Recognize SATA Raid 1 Array 4

Back
Top