Graphic not fitting right in table cell...

B

Brightbelt

Hi-
I'm on Frontpage 2003, Win XP Pro. I'm simulating a
piano type graphic by inserting a 'black piano key'
graphic in alternate table cells. (My intention is just
to get the "suggestion" across and cut download time,
because doing a full piano graphic with rollover effects
is just too slow for dial-up). My problem is that this
black key goes fine into all the table cells (I sized the
cells before creating the graphic etc) except for the top
table cell. See Http://www.frankbright.com and notice the
top black (grey, really) key seems shorter, even though
I've used the same graphic in all the table cells. If I
align it right, it comes up short on the left side and
vice versa. I've checked the table cell properties and
see no differences in comparison to the other cells. What
could be causing this ? I appreciate any help. Many
Thanks,..Frank
 
R

Ronx

The HTML has set the top key to be smaller than the others, 117px wide
compared with 120px for the rest.

Also, the table is set to a height of 45, where 400 would be nearer the
correct figure. Table heights are not normally needed, and are ignored by
many browsers anyway, but if you used a browser that strictly (all browsers
I know take height as a minimum) honoured the height attribute - the
navigation would disappear.

Ron
 
B

Brightbelt

Hi-
Thanks Ron... I appreciate your taking a look at it.
I'm usually more thorough about table sizes, but I guess
I got diverted on this. Thanks again,...Frank
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top