FTP Problem

S

Steve

I have installed IIS on my win xp pro pc, I can access the ftp site
from another pc on my lan by typing in ftp://192.168.0.2.
But when I try to access it by typing in the wan IP address I can't
access the site. I get 426 connection closed error message.
I have windows firewall turned off and Norton Internet Security
2005 on I made a rule allowing incoming traffic for TCP. I also
have a Netgear FVS318 Router and I have enabled ftp on port 21 in
the router.
Nothing I try allows me to let someone to connect to my ftp site.
I am on a cable connection.
I also tried several other programs like Serv U and I could let
people connect but the download speeds were very slow like 10-20
kbs. Any help with this problem would be greatly appreciated
 
R

Robert L [MS-MVP]

you may want to use telnet to check the connection.

--
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on
http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top