Focus or tracking error using NERO to burn CD's

[Guest]

Can anyone help? While burning a CD with Nero, the buring process stops with
a failure after 70% of activity. Following is part of the log.. can anyone
help?

23.22.46 #32 SCSI -1039 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05700000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x04 0x25 0xED 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01

23.22.46 #33 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error

23.22.46 #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23.22.46 #35 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

23.22.46 #36 SCSI -1039 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01

23.22.47 #37 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error

23.22.47 #38 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

23.22.47 #39 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)

23.22.47 #40 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

23.22.47 #41 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Ciao. Giorgio

 

[Guest]

Uninstall in Add or Remove Programs under the Control Panel.
Reinstall. You may have some corrupt files. If that doesn't solve the
situation, troubleshoot your burner, it may have technical problems.

 

[Guest]

I have tried and did not help. I have finaly bought a new DVD driver and all
is ok now, except the fact that now CD programs, with autorun in it, will not
start the program automatically, I have to get into the system resources and
start the program myself... Any idea how to set things back (I might have
inadvertantly set somthing wrong which I do not remeber)?
Thanks.