floppy-disk station won't work

[Guest]

my station-A:\ don't work
I have a error report with id 1002
It's happened when a cath a virus named NYB
I have a antivirus program working, but it's a free edition and at this
moment a will keep it, cause it's do his job. However it's not support probs
with my A station
For so far a have no other probs
How can i clean up this misery?

 

[Guest]

Insert any floppy disk in the "A" drive and reboot your PC. Does it come up
with an error of "improper disk press any key" or something like that?
If it does, that means that your PC is reading the "A" drive. Remove the
disk and reboot then try the drive again. If you get no error message, then
the "A" drive is either no longer functioning or improperly connected.

 

[Guest]

the message"will you format the disk" appears.I now it's contain files, so
there is still something wrong. Before a reboot already in"diagnostic" and"
selective mode"with my aid-program. I think that now the onely solution is to
delete my "{stuurprogramma in dutch language}", my program who "gearing my
station".
Can you advice the proper procedure to do that? Or is it completly the wrong
way i going up. Tell me. Already thanks on advance and friendly regards of
newbe L.

 

[Guest]

Insert any floppy disk in the "A" drive and reboot your PC. Does it come up
with an error of "improper disk press any key" or something like that?
If it does, that means that your PC is reading the "A" drive. Remove the
disk and reboot then try the drive again. If you get no error message, then
the "A" drive is either no longer functioning or improperly connected.
-- There happened a lot the past day's. I dit a MBR-reboot, succesfully.

So my probs have a solution at the moment.My fd-station works. I scanned the
whole pc with 2 different programs and the result is a satisfy" no virus
found".
Still i'm worry that it's going wrong. In the testresults of AVG i found the
discription "changed" at the DLL-files shell32,user32. ntos..and so.
I hope that i can remain or obtain my current configuration for so far there
are no problems.
What do i with systemrecovery? Should i make a recoverypoint?
Please advice me the best procedure to keep it well
Thk's anyway and a happy(virus-free) new jear!