Firewire connected Panasonic camcorder - empty AUTOPLAY popup

  • Thread starter Thread starter BertieBigBollox
  • Start date Start date
B

BertieBigBollox

Havent used this for a while but it was previously working...

Got a Panasonic camcorder connected via a Firewire PCI card.

When I conenct it all up and power on the camcorder a box pops up
(like when it finds a new device or you plug a USB stick in). It says
the old :-

AUTOPLAY
Windows can perform the same action each time you connect this
device.
What do you want Windows to do?

Trouble is the selection box is COMPLETELY EMPTY...

Any ideas?

Where else can I see if its picked up the firewire camera?
 
Click Start, Run (Type) DevMgmt.Msc [Enter]
When Device Manager opens, expand the view of the category called
"Imaging Devices" and see if the Camcorder is listed.
 
Click Start, Run (Type) DevMgmt.Msc [Enter]
When Device Manager opens, expand the view of the category called
"Imaging Devices" and see if the Camcorder is listed.


Havent used this for a while but it was previously working...
Click to expand...
Got a Panasonic camcorder connected via a Firewire PCI card.
Click to expand...
When I conenct it all up and power on the camcorder a box pops up
(like when it finds a new device or you plug a USB stick in). It says
the old :-
Click to expand...
AUTOPLAY
Windows can perform the same action each time you connect this
device.
What do you want Windows to do?
Click to expand...
Trouble is the selection box is COMPLETELY EMPTY...
Click to expand...
Any ideas?
Click to expand...
Where else can I see if its picked up the firewire camera?
Click to expand...
Click to expand...

Yes. It does appear....
 
Haven't used this for awhile but it was previously working...

Got a Panasonic camcorder connected via a Firewire PCI card.

When I connect it all up and power on the camcorder a box pops up
(like when it finds a new device or you plug a USB stick in). It says
the old :-

AUTOPLAY
Windows can perform the same action each time you connect this
device.
What do you want Windows to do?

Trouble is the selection box is COMPLETELY EMPTY...

Any ideas?

Where else can I see if it's picked up the Firewire camera?
Click to expand...

Maybe this will help.

http://www.kellys-korner-xp.com/xp_tweaks.htm
234. (r-h column) AutoPlay Repair Tool
 
Then the Camcorder is connected and should work.

Why the AutoPlay handler table is empty I can't say. I use a tool
called CleanHandlers Version 2.4 to fix/repair those types of issue(s).
http://windowsxp.mvps.org/autoplayhandlers.htm

Click Start, Run (Type) DevMgmt.Msc [Enter]
When Device Manager opens, expand the view of the category called
"Imaging Devices" and see if the Camcorder is listed.


Havent used this for a while but it was previously working...
Click to expand...
Got a Panasonic camcorder connected via a Firewire PCI card.
Click to expand...
When I conenct it all up and power on the camcorder a box pops up
(like when it finds a new device or you plug a USB stick in). It says
the old :-
Click to expand...
AUTOPLAY
Windows can perform the same action each time you connect this
device.
What do you want Windows to do?
Click to expand...
Trouble is the selection box is COMPLETELY EMPTY...
Click to expand...
Any ideas?
Click to expand...
Where else can I see if its picked up the firewire camera?
Click to expand...
Click to expand...

Yes. It does appear....
Click to expand...
 
Then the Camcorder is connected and should work.

Why the AutoPlay handler table is empty I can't say. I use a tool
called CleanHandlers Version 2.4 to fix/repair those types of issue(s).http://windowsxp.mvps.org/autoplayhandlers.htm


Click Start, Run (Type) DevMgmt.Msc [Enter]
When Device Manager opens, expand the view of the category called
"Imaging Devices" and see if the Camcorder is listed.

Havent used this for a while but it was previously working...
Got a Panasonic camcorder connected via a Firewire PCI card.
When I conenct it all up and power on the camcorder a box pops up
(like when it finds a new device or you plug a USB stick in). It says
the old :-
AUTOPLAY
Windows can perform the same action each time you connect this
device.
What do you want Windows to do?
Trouble is the selection box is COMPLETELY EMPTY...
Any ideas?
Where else can I see if its picked up the firewire camera?
Click to expand...
Click to expand...
Yes. It does appear....
Click to expand...
Click to expand...

Moviemaker is still saying no capture device even though the camcorder
appears in device manager (and disappears if u power off).
 
Hi,

I have exactly the same problem and therefore i would like ask you about the
solution. Did you have ever found out about the solution?

I get the "selection box is COMPLETELY EMPTY".

Please tell me about the solution if you got one.

Thanks a lot.
 
Back
Top