explorer and iexplorer error

N

naresh9876

i got this error

"Faulting application iexplore.exe, version 7.0.6000.16574, faulting module
user32.dll, version 5.1.2600.3099, fault address 0x00009dda."

and

"Windows cannot access the file C:\WINDOWS\system32\en-US\ieframe.dll.mui
for one of the following reasons: there is a problem with the network
connection, the disk that the file is stored on, or the storage drivers
installed on this computer; or the disk is missing. Windows closed the
program Internet Explorer because of this error.

Program: Internet Explorer
File: C:\WINDOWS\system32\en-US\ieframe.dll.mui

The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that
corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that
there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify
that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click
Start, click Run, type CMD, and then click OK. At the command prompt, type
CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the
disk might be damaged. If it is a hard disk, contact your administrator or
computer hardware vendor for further assistance.
Additional Data
Error value: C0000010
Disk type: 3

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp."

so can anyone help me? thx.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top