Exception Processing Message c00000a3 Parameters 75b6bf9c 4 75b6bf

[Guest]

Help, I've been getting an error message every few minutes -

Windows - Drive Not Ready
Windows - drive not ready Exception Processing Message c00000a3 Parameters
75b6bf9c 4 75b6bf9c 75b6bf9c
<Cancel> <Try Again> <Continue>

This has been happening for quite a few months now, I use AVG, Spybot,
Ad-Aware. It seems to start coming on as soon as I put a CD or DVD in the CD
or the DVD drives. After that, it keeps coming on every little bit until the
drive has not been opened for an hour or so??? I just got an external DVD
drive and plugged it into the USB port. I've been backing up info on DVDs,
and the message has come on every 30 seconds or so. It's very irritating! I
keep hitting any of the three buttons that come on, but the same results - it
comes up again in a little bit.

I've tried to find this particular message on the web, but there are very
few responses. I'm not sure of the language of the error message, most
others I find say c0000013 instead of c00000a3. Will the same types of fixes
work? What is causing this! I'm getting desperate.

Thanks!

 

[Guest]

I get the same error! i cant figure it out either but i think its a USB
issue. i am having troubles with sound coming from my USB headphones/mic so
its got to be a USB issue please someone help :S

 

[Xe0nâ„¢]

Hi, got the same prob....but my anti-virus prog blocked an unknown virus
COMUSTUIDLL.EXE.

solution:
Go to start run, and type regedit, and search the entire registry for
COMUSTUIDLL.EXE and Delete all, Then go to
%systemroot%\windows\system32\COMUSTUIDLL.EXE and delete it there also!

Reboot pc,

Should be gone...!

for any other queries mail me on (e-mail address removed)

 

[Bruno]

Just go into device manager and disable the floppy drive. I got that tip
from another forum and it sorted me out.

 

[witchasam]

I get the same thing only I get it from my DVD Drive (not USB) OR my USB
Printer. Timing nd frequency same as original message. Device manager hangs
up when I try to disable floppy drive.

 

[msuner]

I had the same problem and followed your directions. Too early to tell yet if
it will come back. Do we know what COMUSTUIDLL.EXE is?

Thanks...

 

[Lisa K]

Witchasam,
I am having the same problem with a DVD drive. When ever I try to load
something on it, I get the Exception Processing Message. Where you able to
resovle the issue?

 

[Th3-L@m3r]

Try to remove any removable disk (etc flsh drive and cardreaders)

 

[drieck]

Help, I've been getting an error message every few minutes -

Windows - Drive Not Ready
Windows - drive not ready Exception Processing Message c00000a3 Parameters
75b6bf9c 4 75b6bf9c 75b6bf9c
<Cancel> <Try Again> <Continue>

This has been happening for quite a few months now, I use AVG, Spybot,
Ad-Aware. It seems to start coming on as soon as I put a CD or DVD in the CD
or the DVD drives. After that, it keeps coming on every little bit until the
drive has not been opened for an hour or so??? I just got an external DVD
drive and plugged it into the USB port. I've been backing up info on DVDs,
and the message has come on every 30 seconds or so. It's very irritating! I
keep hitting any of the three buttons that come on, but the same results - it
comes up again in a little bit.

I've tried to find this particular message on the web, but there are very
few responses. I'm not sure of the language of the error message, most
others I find say c0000013 instead of c00000a3. Will the same types of fixes
work? What is causing this! I'm getting desperate.

Thanks!

 

[drieck]

(exception processing massage c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c)
This comes up every time it seems that my system is being challenged or over
extended. I found that my ( CD-ROM ), (CD-RW): drivers were crowded in
(driver detail) by other drivers from another application. I then found a
driver that
was some how pulling the resources from my cd drivers and giving the memory
to the application. (C:\WINDOWS\system32\drivers\cbidf2k.old ) This is the
driver and it's path, I found that this driver was loaded at the same time
as the application I found dragging my system recourses from my cd-rom
drivers. I just changed
(cbidf2k.sys) to (cbidf2k.old), I have no more broblems with this exception
error.

 

[SK]

Help, I've been getting an error message every few minutes -

Windows - Drive Not Ready
Windows - drive not ready Exception Processing Message c00000a3 Parameters
75b6bf9c 4 75b6bf9c 75b6bf9c
<Cancel> <Try Again> <Continue>

This has been happening for quite a few months now, I use AVG, Spybot,
Ad-Aware. It seems to start coming on as soon as I put a CD or DVD in the CD
or the DVD drives. After that, it keeps coming on every little bit until the
drive has not been opened for an hour or so??? I just got an external DVD
drive and plugged it into the USB port. I've been backing up info on DVDs,
and the message has come on every 30 seconds or so. It's very irritating! I
keep hitting any of the three buttons that come on, but the same results - it
comes up again in a little bit.

I've tried to find this particular message on the web, but there are very
few responses. I'm not sure of the language of the error message, most
others I find say c0000013 instead of c00000a3. Will the same types of fixes
work? What is causing this! I'm getting desperate.

Thanks!

 

[Randem]

Have you checked the Event Viewer for clarification?

--
Randem Systems
The Top Inno Setup Script Generator
http://www.randem.com/innoscript.html
http://www.rndem.com/installerproblems.html
http://www.randem.com/vistainstalls.html
http://www.financialtrainingservices.org

 

[Randem]

Try this - http://www.randem.com/virusproblems.html


--
Randem Systems
The Top Inno Setup Script Generator
http://www.randem.com/innoscript.html
http://www.rndem.com/installerproblems.html
http://www.randem.com/vistainstalls.html
http://www.financialtrainingservices.org

 

[Kasun]

Hi,

I had the same problem in my computer. I disabled the floppy drive from BIOS
& then then the problem solved. Try it out..

Kasun.

 

[James]

turning bios floppy drive off fix my problem

Hi,

I had the same problem in my computer. I disabled the floppy drive from BIOS
& then then the problem solved. Try it out..

Kasun.

 

[ib]

Efter installation af 2 ens computere, hvor jeg havde ændret drevbogstav for
DVD-drev og kortlæsere på den ene og ikke på den anden, fik jeg
fejlmeddelelsen på begge, og begge viste et A-drev i stifinder, selv om der
ikke er diskettedrev på computerne. På den computer, hvor jeg ikke havde
ændret drevbogstaver, forsvandt fejlmeddelelsen efter nogle bootninger, mens
det ikke eksisterende A-drev blev ved med at forekomme i stifinder. Men på
den anden blev fejlmeddelelsen ved med at dukke op. Da jeg deaktiverede
diskettedrevet i enhedshåndteringen, forsvandt såvel A-drevet i stifinderen
som fejlmeddelelsen fra den anden computer.
Dette kan måske inspirere?

 

[jpc]

I did this...soooooooooooo simple and had been driving me nuts!!!

Thanks :0)

 

[thoob]

Thanks for this works a treat. Started getting the error message a few weeks
a go, tried all sorts of things but disabling the floppy drive got rid of it.

thanks again...

 

[gabby]

Hi,

I had the same problem in my computer. I disabled the floppy drive from BIOS
& then then the problem solved. Try it out..

Kasun.

 

[gabby]

Thanks for this works a treat. Started getting the error message a few weeks
a go, tried all sorts of things but disabling the floppy drive got rid of it.

thanks again...

I checked a number of forums where they suggested changing drive letters,
removing code from the registry, or disabling the floppy in the bios.
Now I'm no expert with this stuff but it seemed to me that there was no
virus causing this error, but users using external devices (USB, camera smart
cards, etc) prior to this error occurring.

Bad When I run “one-click maintenance†(Tuneup Utilities 2008) I
always get this error.
Good It is repeatable, so an easy way to check to see if a solution
works.

Assuming this was an error injected by an external device, I simply clicked
:Safely Remove external device (whatever letter it was assigned). There was
no device connected but it showed a USB drive active. I highlighted and
clicked okay and the drive message was, “it is safe to remove the device.â€
Once this was accomplished all exception errors stopped.
I have noticed in the past that adding or removing temporary hardware
doesn’t always work like it should, meaning it says it is removed but it
isn’t.
Hope you get the same results.