error_bad_net_name 67

D

Dave

Hi

Suddenly two of our many workstations[A] can't connect anymore to remote PC's

When i try to connect (using "net use \\pc") I'll get the "error 67: error_bad_net_name"
How can I fix this?


What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK


regards
Dave
 
R

Robert L [MS-MVP]

System error 67 means it is incorrect name and IP.

try this: net view \\remoteip >C:\test.txt. Then post the test.txt back here.

System Errors System error 67 - The network name cannot be found System Error 71 - The network request was not accepted System error 85 has occurred. ...
www.chicagotech.net/systemerrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

Hi

Suddenly two of our many workstations[A] can't connect anymore to remote PC's

When i try to connect (using "net use \\pc") I'll get the "error 67: error_bad_net_name"
How can I fix this?


What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK


regards
Dave
 
D

Dave

here is the result of net view


System Error 5 has occurred
Access is denied


I checked the site you mentioned and noticed thas the service "netlogon" was disabled.
I enabled it and now I get an overview of the shares from a few pc's (most of them still return the error 5)
and i still get the 67 error from all machines?
 
R

Robert L [MS-MVP]

System error 5 is permission error. make sure you have rights to access the remote computers.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
here is the result of net view


System Error 5 has occurred
Access is denied


I checked the site you mentioned and noticed thas the service "netlogon" was disabled.
I enabled it and now I get an overview of the shares from a few pc's (most of them still return the error 5)
and i still get the 67 error from all machines?
 
D

Dave

I'm logged in as administrator on both sides
Where can I find or how do i give rights to access a remote computer

I only can find the opposit in secpol "access this computer from the network"
and this setting is correct on both sites (the group administrators has thre rights)



System error 5 is permission error. make sure you have rights to access the remote computers.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
here is the result of net view


System Error 5 has occurred
Access is denied


I checked the site you mentioned and noticed thas the service "netlogon" was disabled.
I enabled it and now I get an overview of the shares from a few pc's (most of them still return the error 5)
and i still get the 67 error from all machines?


System error 67 means it is incorrect name and IP.

try this: net view \\remoteip >C:\test.txt. Then post the test.txt back here.

System Errors System error 67 - The network name cannot be found System Error 71 - The network request was not accepted System error 85 has occurred. ...
www.chicagotech.net/systemerrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

Hi

Suddenly two of our many workstations[A] can't connect anymore to remote PC's

When i try to connect (using "net use \\pc") I'll get the "error 67: error_bad_net_name"
How can I fix this?


What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK


regards
Dave
Click to expand...
Click to expand...
 
C

cecilmn54

Just a thought but try right click My Computer > Properties, select tab
REMOTE....Make sure remote desktop is checked and add users to the list
that have rights to access remotely.




I'm logged in as administrator on both sides
Where can I find or how do i give rights to access a remote computer

I only can find the opposit in secpol "access this computer from the network"
and this setting is correct on both sites (the group administrators has thre rights)



System error 5 is permission error. make sure you have rights to access the remote computers.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
here is the result of net view


System Error 5 has occurred
Access is denied


I checked the site you mentioned and noticed thas the service "netlogon" was disabled.
I enabled it and now I get an overview of the shares from a few pc's (most of them still return the error 5)
and i still get the 67 error from all machines?


System error 67 means it is incorrect name and IP.

try this: net view \\remoteip >C:\test.txt. Then post the test.txt back here.

System Errors System error 67 - The network name cannot be found System Error 71 - The network request was not accepted System error 85 has occurred. ...
www.chicagotech.net/systemerrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

Hi

Suddenly two of our many workstations[A] can't connect anymore to remote PC's

When i try to connect (using "net use \\pc") I'll get the "error 67: error_bad_net_name"
How can I fix this?


What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK


regards
Dave
Click to expand...
Click to expand...
Click to expand...
 
D

Dave

Tried it without success

Just a thought but try right click My Computer > Properties, select tab
REMOTE....Make sure remote desktop is checked and add users to the list
that have rights to access remotely.




I'm logged in as administrator on both sides
Where can I find or how do i give rights to access a remote computer

I only can find the opposit in secpol "access this computer from the network"
and this setting is correct on both sites (the group administrators has thre rights)



System error 5 is permission error. make sure you have rights to access the remote computers.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
here is the result of net view


System Error 5 has occurred
Access is denied


I checked the site you mentioned and noticed thas the service "netlogon" was disabled.
I enabled it and now I get an overview of the shares from a few pc's (most of them still return the error 5)
and i still get the 67 error from all machines?



System error 67 means it is incorrect name and IP.

try this: net view \\remoteip >C:\test.txt. Then post the test.txt back here.

System Errors System error 67 - The network name cannot be found System Error 71 - The network request was not accepted System error 85 has occurred. ...
www.chicagotech.net/systemerrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

Hi

Suddenly two of our many workstations[A] can't connect anymore to remote PC's

When i try to connect (using "net use \\pc") I'll get the "error 67: error_bad_net_name"
How can I fix this?


What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK


regards
Dave
Click to expand...
Click to expand...
Click to expand...
 
C

cecilmn54

Is the firewall turned off?

Tried it without success

Just a thought but try right click My Computer > Properties, select tab
REMOTE....Make sure remote desktop is checked and add users to the list
that have rights to access remotely.




I'm logged in as administrator on both sides
Where can I find or how do i give rights to access a remote computer

I only can find the opposit in secpol "access this computer from the network"
and this setting is correct on both sites (the group administrators has thre rights)




System error 5 is permission error. make sure you have rights to access the remote computers.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
here is the result of net view


System Error 5 has occurred
Access is denied


I checked the site you mentioned and noticed thas the service "netlogon" was disabled.
I enabled it and now I get an overview of the shares from a few pc's (most of them still return the error 5)
and i still get the 67 error from all machines?



System error 67 means it is incorrect name and IP.

try this: net view \\remoteip >C:\test.txt. Then post the test.txt back here.

System Errors System error 67 - The network name cannot be found System Error 71 - The network request was not accepted System error 85 has occurred. ...
www.chicagotech.net/systemerrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

Hi

Suddenly two of our many workstations[A] can't connect anymore to remote PC's

When i try to connect (using "net use \\pc") I'll get the "error 67: error_bad_net_name"
How can I fix this?


What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK


regards
Dave
Click to expand...
Click to expand...
Click to expand...
 
D

Dave

FW is disabled

Is the firewall turned off?

Tried it without success

Just a thought but try right click My Computer > Properties, select tab
REMOTE....Make sure remote desktop is checked and add users to the list
that have rights to access remotely.





Dave wrote:
I'm logged in as administrator on both sides
Where can I find or how do i give rights to access a remote computer

I only can find the opposit in secpol "access this computer from the network"
and this setting is correct on both sites (the group administrators has thre rights)




System error 5 is permission error. make sure you have rights to access the remote computers.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
here is the result of net view


System Error 5 has occurred
Access is denied


I checked the site you mentioned and noticed thas the service "netlogon" was disabled.
I enabled it and now I get an overview of the shares from a few pc's (most of them still return the error 5)
and i still get the 67 error from all machines?



System error 67 means it is incorrect name and IP.

try this: net view \\remoteip >C:\test.txt. Then post the test.txt back here.

System Errors System error 67 - The network name cannot be found System Error 71 - The network request was not accepted System error 85 has occurred. ...
www.chicagotech.net/systemerrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

Hi

Suddenly two of our many workstations[A] can't connect anymore to remote PC's

When i try to connect (using "net use \\pc") I'll get the "error 67: error_bad_net_name"
How can I fix this?


What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK


regards
Dave
Click to expand...
Click to expand...
Click to expand...
 
P

Peter

On workstation , assume its IP to be 10.20.30.40, perform the following:
1) Reboot
2) Login as administrator
3) Check its IP by cmd
ipconfig /all
4) Try to map a drive to itself by cmd
net use X: \\10.20.30.40\c$
 
D

Dave

From workstation this works perfectly but not from workstation [A]

result from [A] (from [A] "net use X: \\<IPaddr[A]>\c$")
This returns: Error 67 - The network name cannot be found

(this is in fact the thing i tried before with "net use \\127.0.0.1")



What i've tried:
from an [A] workstation to an (see above)

-ping to using IPaddr = OK
-ping to using PCname = OK
-"net use \\" using PCname = error 67
-"net use \\" using IPaddr = error 67
-"net use \\127.0.0.1" = error 67
-"net use \\<IPaddr[A]>" = error 67


from an workstation to an [A] (see above)

-ping to [A] using IPaddr = OK
-ping to [A] using PCname = OK
-"net use \\[A]" using PCname = OK
-"net use \\[A]" using IPaddr = OK
-"net use \\127.0.0.1" = OK
-"net use \\<IPaddr>" = OK
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Guest account: how enable network access 5
The PC name ends up with DNS name appended. 2
Network printer conundrum... 1
Strange behaviour! 5
Script to get file versioin info on remote systems 10
Can renew IP address 3
Two General Question 5
IPAddress construction allways rise an exception 2

Top