Error

[Katheryne]

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The
memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[Brad Combs]

Hi Kathy,

There are hundreds of possibilities for this type of error. Let's start by
taking a look at the FBA log located at \Windows\fba\fbalog.txt. Attach the
log to this thread and let us have a look.

Brad

 

[Katheryne]

Hi Brad
I got the fixed for low memory problem, but now i am facing new problem,
after FBA when the system goes for 2nd boot, it doesnt show anything on
Screen. Means screen becomes blank.

Is there any changes in settings I have to make?

Thanks
Kathy

 

[Katheryne]

Hi All
While pushing the image through Wizard server, i am getting the error
"Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

 

[Katheryne]

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled to
Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM
[(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous time

Thanks
Kathy

 

[KM]

Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

 

[Katheryne]

Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also,
time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne

Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled
to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM
[(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous
time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error
"Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The
memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[KM]

Katheryne,

Please read through many posts on the subject:
http://groups-beta.google.com/group...ft.public.windowsxp.embedded&q=DST+EWF&qt_g=1

This fix may be usefule to you:
http://groups-beta.google.com/group/microsoft.public.windowsxp.embedded/msg/378bffca5b21729d?hl=en&

--
Regards,
KM

Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also, time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne

Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[Katheryne]

Hi KM
Even though by changing the registry setting, time is not coming
properly,
Please provide me the solution for the same. I am struggling with this issue
since last 10 Days.]

Thanks
Kathreryne

Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also,
time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne

Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and
disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM
[(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous
time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error
"Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The
memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[KM]

Katheryne,

I am sorry that you have spent so much valuable time on this problem.

See all the related values here:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx

Beside the DisableAutoDaylightTimeSet you would also want to set DaylightBias=0.

Also, please read through this thread:
http://groups-beta.google.com/group...6fb830f0b91/1e5eb952380327d0#1e5eb952380327d0

KM

Hi KM
Even though by changing the registry setting, time is not coming properly,
Please provide me the solution for the same. I am struggling with this issue since last 10 Days.]

Thanks
Kathreryne

Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also, time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne

Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[Katheryne]

Thanks KM
But my problem is not with "Pecefic daylight time"
My problem is with "Eastern Daylight time"

Please suggest : Should I make the same registry setting as in "pecefic
daylight time" or is there anything change?
This issue has become very much critical for me and still not get resolved.
Please help me out.

Thanks and Regards
Kathy

Katheryne,

I am sorry that you have spent so much valuable time on this problem.

See all the related values here:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx

Beside the DisableAutoDaylightTimeSet you would also want to set
DaylightBias=0.

Also, please read through this thread:
http://groups-beta.google.com/group...6fb830f0b91/1e5eb952380327d0#1e5eb952380327d0

KM

Hi KM
Even though by changing the registry setting, time is not coming
properly,
Please provide me the solution for the same. I am struggling with this
issue since last 10 Days.]

Thanks
Kathreryne

Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also,
time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne


Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and
disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM
[(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the
previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error
"Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c".
The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[KM]

Katheryne,

All you do is set up the required settings for the Time Zone (e.g., the Eastern Daylight Time) and then capture the reg.values under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation].

Make sure to set DisableAutoDaylightTimeSet=1 and DaylightBias=0.

--
Regards,
KM

Thanks KM
But my problem is not with "Pecefic daylight time"
My problem is with "Eastern Daylight time"

Please suggest : Should I make the same registry setting as in "pecefic daylight time" or is there anything change?
This issue has become very much critical for me and still not get resolved.
Please help me out.

Thanks and Regards
Kathy

Katheryne,

I am sorry that you have spent so much valuable time on this problem.

See all the related values here:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx

Beside the DisableAutoDaylightTimeSet you would also want to set DaylightBias=0.

Also, please read through this thread:
http://groups-beta.google.com/group...6fb830f0b91/1e5eb952380327d0#1e5eb952380327d0

KM

Hi KM
Even though by changing the registry setting, time is not coming properly,
Please provide me the solution for the same. I am struggling with this issue since last 10 Days.]

Thanks
Kathreryne



Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also, time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne


Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[Katheryne]

Hi KM

Here I am writing the steps i followed.
Please let me know if i missed any step of the following

a.. Disabled the Write filter
b.. [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation]. Set
"DaylightBias=0"
a.. Previous the value of "DaylightBias = ffffffc4.
c.. Changed the date/time by click "date/time" icon in system tray.
a.. Date: 3rd April 2005
b.. Time: 1:58:00 AM,
c.. TimeZone: (GMT -05:00) Eastern Time (US & Canada).
d.. "Automatically adjust clock for daylight saving changes" box :
"checked"
d.. Enabled the Write Filter
e.. Rebooted the system.


Result

a.. Time was coming as 2:01 AM
b.. On second reboot time was 2:02 AM
Thanks
Kathy

Katheryne,

All you do is set up the required settings for the Time Zone (e.g., the
Eastern Daylight Time) and then capture the reg.values under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation].

Make sure to set DisableAutoDaylightTimeSet=1 and DaylightBias=0.

--
Regards,
KM

Thanks KM
But my problem is not with "Pecefic daylight time"
My problem is with "Eastern Daylight time"

Please suggest : Should I make the same registry setting as in "pecefic
daylight time" or is there anything change?
This issue has become very much critical for me and still not get
resolved.
Please help me out.

Thanks and Regards
Kathy

Katheryne,

I am sorry that you have spent so much valuable time on this problem.

See all the related values here:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx

Beside the DisableAutoDaylightTimeSet you would also want to set
DaylightBias=0.

Also, please read through this thread:
http://groups-beta.google.com/group...6fb830f0b91/1e5eb952380327d0#1e5eb952380327d0

KM

Hi KM
Even though by changing the registry setting, time is not coming
properly,
Please provide me the solution for the same. I am struggling with this
issue since last 10 Days.]

Thanks
Kathreryne



Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then
also, time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne


Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and
disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58
AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the
previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the
error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c".
The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[KM]

Katheryne,

Here I am writing the steps i followed.
Please let me know if i missed any step of the following

a.. Disabled the Write filter
b.. [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation]. Set "DaylightBias=0"
a.. Previous the value of "DaylightBias = ffffffc4.
c.. Changed the date/time by click "date/time" icon in system tray.
a.. Date: 3rd April 2005
b.. Time: 1:58:00 AM,
c.. TimeZone: (GMT -05:00) Eastern Time (US & Canada).
d.. "Automatically adjust clock for daylight saving changes" box : "checked"

I thought you wanted this turned off?


--
Regards,
KM

d.. Enabled the Write Filter
e.. Rebooted the system.


Result

a.. Time was coming as 2:01 AM
b.. On second reboot time was 2:02 AM
Thanks
Kathy

Katheryne,

All you do is set up the required settings for the Time Zone (e.g., the Eastern Daylight Time) and then capture the reg.values
under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation].

Make sure to set DisableAutoDaylightTimeSet=1 and DaylightBias=0.

--
Regards,
KM

Thanks KM
But my problem is not with "Pecefic daylight time"
My problem is with "Eastern Daylight time"

Please suggest : Should I make the same registry setting as in "pecefic daylight time" or is there anything change?
This issue has become very much critical for me and still not get resolved.
Please help me out.

Thanks and Regards
Kathy

Katheryne,

I am sorry that you have spent so much valuable time on this problem.

See all the related values here:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx

Beside the DisableAutoDaylightTimeSet you would also want to set DaylightBias=0.

Also, please read through this thread:
http://groups-beta.google.com/group...6fb830f0b91/1e5eb952380327d0#1e5eb952380327d0

KM

Hi KM
Even though by changing the registry setting, time is not coming properly,
Please provide me the solution for the same. I am struggling with this issue since last 10 Days.]

Thanks
Kathreryne



Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also, time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne


Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[Katheryne]

Hi KM
So please let me know the step I should follow to get this problem resolved
I will be highly thankful to you.

Regards
Kathy

Katheryne,

Here I am writing the steps i followed.
Please let me know if i missed any step of the following

a.. Disabled the Write filter
b.. [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation]. Set
"DaylightBias=0"
a.. Previous the value of "DaylightBias = ffffffc4.
c.. Changed the date/time by click "date/time" icon in system tray.
a.. Date: 3rd April 2005
b.. Time: 1:58:00 AM,
c.. TimeZone: (GMT -05:00) Eastern Time (US & Canada).
d.. "Automatically adjust clock for daylight saving changes" box :
"checked"

I thought you wanted this turned off?


--
Regards,
KM

d.. Enabled the Write Filter
e.. Rebooted the system.


Result

a.. Time was coming as 2:01 AM
b.. On second reboot time was 2:02 AM
Thanks
Kathy

Katheryne,

All you do is set up the required settings for the Time Zone (e.g., the
Eastern Daylight Time) and then capture the reg.values under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation].

Make sure to set DisableAutoDaylightTimeSet=1 and DaylightBias=0.

--
Regards,
KM


Thanks KM
But my problem is not with "Pecefic daylight time"
My problem is with "Eastern Daylight time"

Please suggest : Should I make the same registry setting as in "pecefic
daylight time" or is there anything change?
This issue has become very much critical for me and still not get
resolved.
Please help me out.

Thanks and Regards
Kathy

Katheryne,

I am sorry that you have spent so much valuable time on this problem.

See all the related values here:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx

Beside the DisableAutoDaylightTimeSet you would also want to set
DaylightBias=0.

Also, please read through this thread:
http://groups-beta.google.com/group...6fb830f0b91/1e5eb952380327d0#1e5eb952380327d0

KM

Hi KM
Even though by changing the registry setting, time is not coming
properly,
Please provide me the solution for the same. I am struggling with
this issue since last 10 Days.]

Thanks
Kathreryne



Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then
also, time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne


Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and
disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to
1:58 AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the
previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the
error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at
"0x0000000c". The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy

 

[KM]

Katheryne,

You lost me. I thought you were on the right track.

Anyway, I don't think I can add anything more to what have been said in this thread.

Just to summarize:
- you set up the Eastern Daylight Time settings at run time
- you capture the reg.settings mentioned on the TimeZone tip page:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx
- you set DisableAutoDaylightTimeSet=1 and DaylightBias=0
- you integrate the fixed reg.entries back to your image and make sure to commit the changes (or have them added in TD)


--
Regards,
KM

Hi KM
So please let me know the step I should follow to get this problem resolved
I will be highly thankful to you.

Regards
Kathy

Katheryne,

Here I am writing the steps i followed.
Please let me know if i missed any step of the following

a.. Disabled the Write filter
b.. [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation]. Set "DaylightBias=0"
a.. Previous the value of "DaylightBias = ffffffc4.
c.. Changed the date/time by click "date/time" icon in system tray.
a.. Date: 3rd April 2005
b.. Time: 1:58:00 AM,
c.. TimeZone: (GMT -05:00) Eastern Time (US & Canada).
d.. "Automatically adjust clock for daylight saving changes" box : "checked"

I thought you wanted this turned off?


--
Regards,
KM

d.. Enabled the Write Filter
e.. Rebooted the system.


Result

a.. Time was coming as 2:01 AM
b.. On second reboot time was 2:02 AM
Thanks
Kathy


Katheryne,

All you do is set up the required settings for the Time Zone (e.g., the Eastern Daylight Time) and then capture the reg.values
under
[HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation].

Make sure to set DisableAutoDaylightTimeSet=1 and DaylightBias=0.

--
Regards,
KM


Thanks KM
But my problem is not with "Pecefic daylight time"
My problem is with "Eastern Daylight time"

Please suggest : Should I make the same registry setting as in "pecefic daylight time" or is there anything change?
This issue has become very much critical for me and still not get resolved.
Please help me out.

Thanks and Regards
Kathy

Katheryne,

I am sorry that you have spent so much valuable time on this problem.

See all the related values here:
http://msdn.microsoft.com/embedded/community/community/tips/xp/timezone/default.aspx

Beside the DisableAutoDaylightTimeSet you would also want to set DaylightBias=0.

Also, please read through this thread:
http://groups-beta.google.com/group...6fb830f0b91/1e5eb952380327d0#1e5eb952380327d0

KM

Hi KM
Even though by changing the registry setting, time is not coming properly,
Please provide me the solution for the same. I am struggling with this issue since last 10 Days.]

Thanks
Kathreryne



Hi KM

The vaue of "DisableAutoDaylightTimeSet=dword" is already :1. then also, time is not coming properly.
Is there any other change i have to make?

Regards
Katheryne


Katheryne,

You may want to disable DST (Daylight Time saving) in your runtime.
Set the DisableAutoDaylightTimeSet=dword:1 value under [HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] key.
http://www.winguides.com/registry/display.php/1283/

--
Regards,
KM

Hi All
Please provide me the solution,problem is as below:

- Pushed an image to client, Logged in through Administraotr and disabled to Write Filter
- system rebooted, Chnaged the date to April3,2005 and time to 1:58 AM [(GMT -05:00) Eastern Time (US & Canada)]
- Enable Write filter and Reboot
- Time shows 3:01 AM
- Again reboot and time shows 4:02 AM
- Again reboot and time shows 5:02 AM

Means : after every boot. System shows one hour ahead with the previous time

Thanks
Kathy

Hi All
While pushing the image through Wizard server, i am getting the error "Sym/failure-media and archieve size check"

What is this error and what do i do to resolve this,

Thanks
kathy

hi All

i am finding an error while first boot.

While FBA (Installing Components)



Fba.exe - Application error



The instruction at "0x035f01d0: referenced memory at "0x0000000c". The memory could not be "written".



Cick ok to terminate the program





Plaese provide me the solution for the same.



Thanks

kathy