Error

[Guest]

When trying to start a game an error comes up saying "Warning - No 3D
hardware acceleration found. Your graphics card may not support 3D
acceleration, or you Direct-X version may be out of date" Then I click on OK
and then it says "Sorry, Polar Bowler requires 3D hardware acceleration" Any
Ideas to see if I have andy of this? PLEASE HELP!!

 

[Rich Barry]

Usually you get that message when you don't meet the system
requirements for the game. If you can find out what type
Graphics Card of Chip you have in your system it would help.

 

[Guest]

how do I found that?

Usually you get that message when you don't meet the system
requirements for the game. If you can find out what type
Graphics Card of Chip you have in your system it would help.

 

[Guest]

Here is the Graphic Card Info
---------------
Display Devices
---------------
Card name: Intel(R) 82815 Graphics Controller (Microsoft Corporation)
Manufacturer: Intel Corporation
Chip type: Intel(R) 82815
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_1132&SUBSYS_80E5104D&REV_04
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (24 bit) (60Hz)
Monitor: SyncMaster 173V/172V/173S/173B/174V/175V
Monitor Max Res: 1280,1024
Driver Name: i81xdnt5.dll
Driver Version: 6.13.0001.3198 (English)
DDI Version: 8
Driver Attributes: Final Retail
Driver Date/Size: 8/4/2004 00:56:42, 702845 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: i81xnt5.sys
Mini VDD Date: 8/3/2004 22:29:36, 161020 bytes
Device Identifier: {D7B78E66-5272-11CF-837F-E4A0A6C2CB35}
Vendor ID: 0x8086
Device ID: 0x1132
SubSys ID: 0x80E5104D
Revision ID: 0x0004
Revision ID: 0x0004
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.